The Official H-Body Internet Community

by **10secvega** » Fri Jan 11, 2008 11:11 pm

shoebox1.1 wrote:thats 3 inch to the axle open? if mine was that loud im all set! thats fine with me IM STOKED!!!

Thats 3 " open just under the floor pan and past the fire wall.

by **shoebox1.1** » Sat Jan 12, 2008 12:40 am

right now mine is 4inch open downpipe to "just under the car".. absolutely the bottom of the firewall. we'lll see how loud it is..... if its anything like a normal hotrod we all have heard with flows dumped at the axle with some motor behind it.. thats cool

by **10secvega** » Sat Jan 12, 2008 11:02 am

shoebox1.1 wrote:right now mine is 4inch open downpipe to "just under the car".. absolutely the bottom of the firewall. we'lll see how loud it is..... if its anything like a normal hotrod we all have heard with flows dumped at the axle with some motor behind it.. thats cool

I designed my exhaust then took it to an exhaust shop to have made.I don't think you'll fit 4" over the rear,but should be able to run 4' under the car and keep it tucked up.I run a Dynomax Race bullet mounted where the cat convoter should be.it the run right next to the drive shaft and up over the rear with another bullet mounted sideways like stock.Comes out behind the drivers rear wheel.I can get you some pictures if you like.But just imagine a "F" Body Camaro.

by **shoebox1.1** » Sat Jan 12, 2008 8:54 pm

what you are describing is exactly what i want to do! your my new friend.. lol any other videos of that badass vega??

by **mcssed** » Sat Jan 12, 2008 11:15 pm

hey I like your project....new to this site. i wish I had the time to work on mine like you guys do![/b][/i]

by **shoebox1.1** » Sat Jan 12, 2008 11:20 pm

thanks.... yeah i dont get to get out there as much as id like ethier.. work-home-car-other thats my order

by **10secvega** » Sun Jan 13, 2008 1:52 pm

shoebox1.1 wrote:what you are describing is exactly what i want to do! your my new friend.. lol any other videos of that badass vega??

http://www.knights-rule.com/cgi/gallery ... hmps07.wmv

http://www.knights-rule.com/cgi/gallery ... 421103.wmv

http://www.knights-rule.com/cgi/gallery ... unset2.wmv

http://www.knights-rule.com/cgi/gallery ... unset3.wmv

http://www.knights-rule.com/cgi/gallery ... sunset.wmv

by **shoebox1.1** » Sun Jan 13, 2008 2:10 pm

awesome!

by **shoebox1.1** » Sat Mar 01, 2008 10:28 pm

ive done a lil wheel swapping! got to keep a pontiac a pontiac!! what do you think?

by **shoebox1.1** » Sat Mar 01, 2008 10:30 pm

15x7 trans am firebird wheels... 4.250 backspacing (all) had to run a 1/2 inch spacer on the rear.
235/60 15 rear
215/60 15 front
wish i could have run 50 or 55 series tires but could really find any and they make DR's in 235's

by **spyder_xlch** » Sat Mar 01, 2008 11:46 pm

Looks awesome. Just don't slam that hood yet.

by **shoebox1.1** » Sun Mar 02, 2008 12:23 am

lol ok!

by **Badsunbird** » Sun Mar 02, 2008 12:11 pm

Very Nice.........!

What Exactly Are You Going To Do For A Hood, Or To The Hood To Make It Work ?

Is there anyone who makes a hood for these cars, such as a fiberglass cowl hood for the Pontiac & Buick cars ?

by **Badsunbird** » Sun Mar 02, 2008 12:12 pm

Stupid freak'n thing anyways!

by **Badsunbird** » Sun Mar 02, 2008 12:14 pm

Ah Yea !

Sorry Shoebox1.1, I hate it when it does this !

The Official H-Body Internet Community

4.3 turbo sunbird

4.3 Turbo Sunbird

4.3 Turbo Sunbird

4.3 Turbo Sunbird

Who is online