1978 Monza Spyder

[Andreasu]

Update;

Battery tray;



Cutting out the rust;



Needs some touch-up, but getting there;

[Andreasu]

The enginebay is now 100% free for rust, finaly

[Andreasu]

Working on the lower end of the inner fenders, driver side done.








Mounted the "struts" again.

[Andreasu]

Front end done

[BadBowtie]

Lots of work, but at then end its all worth it. Looking great

[Andreasu]

Found the build sheet, but in a poor condition

[Brian]

That one looks about the same as the one I pulled out of my 2+2. I set it on my desk so that I could scan it the next morning only when I woke up the next day I discovered that one of the dogs had eaten most of it overnight.

Stupid dog.

[80 MONZTA]

Found the build sheet, but in a poor condition

So where was it?

I have my interior completely out, but did not find it. Although there was something that may have been the remains of it, inside the bottom of one of the doors.

[marco_1978_spyder]

From what I could see,(just barely) appears to be a pretty early build car..

[Andreasu]

Found the build sheet, but in a poor condition

So where was it?

I have my interior completely out, but did not find it. Although there was something that may have been the remains of it, inside the bottom of one of the doors.

On the tunnel, behind the OEM sound deadening under the heater controls

[Andreasu]

From what I could see,(just barely) appears to be a pretty early build car..

Cell picture, but I can see that the car is equiped with 2.29 ratio, 305 V8, Auto trans, Z02 spyder something, missing some text etc.

[Andreasu]

A/C delete plate.





Floorpans nearly finished.

[my79monza]

One thing for sure, by the time you're done with this project you should be good at welding sheet metal.
Merle

[Andreasu]

One thing for sure, by the time you're done with this project you should be good at welding sheet metal.
Merle

When I'm done the welder will be attached to my hands, making it impossible to drive the car!

[Andreasu]

Windscreen out and doors off. Anyone got an idea how to remove the windows in the door? Thanks!