The Official H-Body Internet Community

I finaly fired up the engine in the vega today. After letting the cam break in I did a little fine tuning.
It runs real good no leaks and sounds healthy too.Now I need to have a drive shaft made.

Robert

Excellent!

Let me know how the heim trailing arms feel. I'm using the same thing except with the torque arm. I've got high hopes. Thanks Robert.

Any updates? its been close to a month! Also id love to see your display picture full size, looks like an excellent ride.

Black Ceramic Coated 2135 Hooker headers

I Bought a Oil relocator so my headers don't get oil on em when I change the oil. I didn't buy it as a kit the pieces were purchased separately
That way I got what I wanted.

Here you go full size

Made some perches for the vega. Now I can get under it and finish things up

I started to remove the undercoating so I can clean and paint.I also have a little more welding to do on the frame connectors.
Its a lot easier working underneath with the car up so high.The driveshaft is only a mockup for the one Im having made.
The trans and driveshaft will be removed for work being done.Pics of the cleaned area to follow.

Robert

Robert,
can you show where you attatched the front frame connectors too?
looks killer
TC

The front of the frame connectors is not finished yet. Will show pics of it when its all done.

Robert

Sweet ride Rocco!!

Well ,its been a few years and I think its time to get going on my vega and finish it up.Thanks for the compliments

I know the feeling,, I have been spending money this past week like water going over the Niagagra falls
hopefully it will be running by winter 2014

My Vega is at the body shop all apart being painted,been wet sanding it for days now.It will be green in color, i will post pics when it all done.