48 Fiat's Son's 1971 V8 Vega

Tell everyone about the progress of your project! Please respect people's threads.

Moderator: Moderators

Re: 48 Fiat's Son's 1971 V8 Vega

Postby waybad » Mon Sep 16, 2013 6:42 pm

48 Fiat wrote:Waybad I love those trucks, Mine has a Goodwrench 350,TH350 and a 12 Bolt with 3:73s with positrac. It's going to be my tow truck for my 48 Fiat Topolino when I get it done. Thanks for your interest Dave.


Dave,,

like I said earlier,, love those fiats,, I had even bought Revel models of the truck and fiat with a open trailer to put together,, thinking I
would never own either one,, damn kids stole them out of my garage with all my tools,, they were still in the original boxes,, :bang:
please take pictures of it when you are done,, I'm so jealous :mrgreen:
Tinker
Tinker
User avatar
waybad
 
Posts: 1794
Joined: Sun Feb 24, 2008 12:03 am


Re: 48 Fiat's Son's 1971 V8 Vega

Postby V8VEGA*71 » Tue Jun 03, 2014 9:16 am

Hey guys,
I have had some of these pics for quite a while now. We started to focus on a few other projects before tackling all the bodywork at once. So we will some more pics of the taillight panel, but first here is an update on what we have been working on since the last post. I hope you enjoy! :D
You do not have the required permissions to view the files attached to this post.
User avatar
V8VEGA*71
 
Posts: 56
Joined: Wed Feb 02, 2011 9:53 pm

Re: 48 Fiat's Son's 1971 V8 Vega

Postby V8VEGA*71 » Tue Jun 03, 2014 9:36 am

Some more new pics.
You do not have the required permissions to view the files attached to this post.
User avatar
V8VEGA*71
 
Posts: 56
Joined: Wed Feb 02, 2011 9:53 pm

Re: 48 Fiat's Son's 1971 V8 Vega

Postby V8VEGA*71 » Tue Jun 03, 2014 9:42 am

Some more new pics.
You do not have the required permissions to view the files attached to this post.
User avatar
V8VEGA*71
 
Posts: 56
Joined: Wed Feb 02, 2011 9:53 pm

Re: 48 Fiat's Son's 1971 V8 Vega

Postby V8VEGA*71 » Tue Jun 03, 2014 9:47 am

Some more new pics
You do not have the required permissions to view the files attached to this post.
User avatar
V8VEGA*71
 
Posts: 56
Joined: Wed Feb 02, 2011 9:53 pm

Re: 48 Fiat's Son's 1971 V8 Vega

Postby chevyart » Tue Jun 03, 2014 4:12 pm

im running the remote oil filter in the samer area you are using. how did you get both right angle fittings to end up in the positions where you have them, without one hitting the other during tightening. i was going to put one fitting up about 1 1/2 inches higher than the other so they would clear each other. you didnt have to do this. did you tighten them in at the same time, a little at a time, so they would,not hit each other?. i say all this becaUSE THERE SEEMS TO BE NO GUARANTEE THAT THEY BOTH WILL TIGHTEN UP SUFFICIENTLY AND be EXACTLY WHERE YOU WANT TO POSITION THEM(PREFERABLY PARALLEL TO EACH OTHER. THANKS ART
chevyart
 
Posts: 1964
Joined: Fri Oct 27, 2006 10:00 pm

Re: 48 Fiat's Son's 1971 V8 Vega

Postby 48 Fiat » Tue Jun 03, 2014 10:28 pm

Art this is Dave, Jason's dad. He trimmed the length of the barbed end where the hose connects, then took a big gnarly file and filed the corners of the fitting off at a 45 degree angle so one fitting would pass the other while tightening. Thanks for your interest in his project.
User avatar
48 Fiat
 
Posts: 181
Joined: Mon May 17, 2010 7:14 pm
Location: Nampa Idaho

1971 Chevrolet Vega

Re: 48 Fiat's Son's 1971 V8 Vega

Postby chevyart » Tue Jun 03, 2014 10:52 pm

thanks dave you and your son sure did alot of nice work on that vega. we probably have the best bunch of fabricators in the whole hot rod industry, as we are orphans and no one makes goodies for us. keep up the good work. i will try my fittings and see where i get with tightening them. mine are a little different than yours, but i now have some sort of idea on what to do with them. thanks again art
chevyart
 
Posts: 1964
Joined: Fri Oct 27, 2006 10:00 pm

Re: 48 Fiat's Son's 1971 V8 Vega

Postby zeke » Wed Jun 04, 2014 1:22 am

Just read thru your thread, nice work guys! I'm curious as to why you are using the cogged drive setup.
Chris

zeke's 79 Monza Project

zeke's 78 Sport Coupe

Photographs posted by this user (zeke) are the sole property of this poster. Any use without express written permission is prohibited
User avatar
zeke
 
Posts: 2930
Joined: Fri Jul 21, 2006 3:27 am
Location: Southern Ontario, Canada

1979 Chevrolet Monza 2+2

Re: 48 Fiat's Son's 1971 V8 Vega

Postby 48 Fiat » Wed Jun 04, 2014 6:19 pm

Zeke, we decided to use the cog belt set up because it's different and looks pretty cool. I have the same set up on my 56 Chevy pickup. Dave.
User avatar
48 Fiat
 
Posts: 181
Joined: Mon May 17, 2010 7:14 pm
Location: Nampa Idaho

1971 Chevrolet Vega

Re: 48 Fiat's Son's 1971 V8 Vega

Postby Monza Harry » Wed Jun 04, 2014 6:36 pm

Hey Art, If you go by a machine shop, for a couple of coffee's some night you will be able to get yourself an old pipe tap to match your filter bracket/adapter, and shorten the first 3/8" or so off (that will more than likely be the bad part of the tap they would have thrown out anyways, it will cut that aluminum piece like nothing, use kerosene for lube (WD-40 will work in a pinch). Now if you need to get another 1/2 turn just re-tap it a little, beware though a half turn will let the piece turn about 3/4 of a turn, so start out with a lot less than you need, it takes a lot of practice to nail that one the first shot, when I figure it out I'll let you know! (30 years in and I still don't get it every time and I would work on this a couple of times a week). if it is a straight tread like ORB etc. you are on your own. We don't use those in our field very often so I have less than nothing to offer. Harry
I'm not a hoarder I'm a preservationist 78 Monza Spyder (~Soon(ish +/- I guess) To Be 2+2 with Spoilers)
User avatar
Monza Harry
 
Posts: 2568
Joined: Tue Oct 04, 2011 8:50 am
Location: Windsor ON Canada

1978 Chevrolet Monza 2+2

Re: 48 Fiat's Son's 1971 V8 Vega

Postby V8VEGA*71 » Wed Jun 25, 2014 5:21 am

We are currently working on a few projects, but I though it would be fun to make this GIF to show you what we plan to use to support the rear inner fender well. We removed the original brace from both rear inner fender wells. Click on this link for a quick clip of what we plan to use instead -> http://cdn.makeagif.com/media/6-25-2014/bTVYHM.gif
User avatar
V8VEGA*71
 
Posts: 56
Joined: Wed Feb 02, 2011 9:53 pm

Re: 48 Fiat's Son's 1971 V8 Vega

Postby zeke » Wed Jun 25, 2014 9:35 am

Simply for the cool factor is definitely OK in my books! 8)

Cool gif too! :th:
Chris

zeke's 79 Monza Project

zeke's 78 Sport Coupe

Photographs posted by this user (zeke) are the sole property of this poster. Any use without express written permission is prohibited
User avatar
zeke
 
Posts: 2930
Joined: Fri Jul 21, 2006 3:27 am
Location: Southern Ontario, Canada

1979 Chevrolet Monza 2+2

Re: 48 Fiat's Son's 1971 V8 Vega

Postby RamIt » Wed Jun 25, 2014 5:30 pm

V8VEGA*71 wrote:We are currently working on a few projects, but I though it would be fun to make this GIF to show you what we plan to use to support the rear inner fender well. We removed the original brace from both rear inner fender wells. Click on this link for a quick clip of what we plan to use instead -> http://cdn.makeagif.com/media/6-25-2014/bTVYHM.gif

Is this something you could duplicate easily?
Excellent idea for those needing that last bit of room to fit 265's in the back. :th:
_________________________
75 V8 Hatch. Was a cosworth
RamIt
 
Posts: 147
Joined: Sun Apr 21, 2013 3:47 am
Location: Oakland CA

Re: 48 Fiat's Son's 1971 V8 Vega

Postby waybad » Wed Jun 25, 2014 6:11 pm

what would it cost to make them? Thank you!! Tinker
Tinker
User avatar
waybad
 
Posts: 1794
Joined: Sun Feb 24, 2008 12:03 am

PreviousNext

Return to Project Journals

Who is online

Users browsing this forum: No registered users and 2 guests

cron