Re: Vegabee(framing)
Posted: Sun Feb 05, 2017 1:51 pm
Putting more front brake parts on from S10 blazer dual piston
fits inside 15" wheel although with a 1" wheel adapter
Had a time of it getting the right length brake hose for full travel and turning of wheel.Factory is 11" or so.The recommended Nova hose is 15" and is too long and folds into the tire.Ended up ordering a 12" braided hose http://www.ebay.com/itm/10-mm-stainless ... rmvSB=true
After bending the bracket and orienting the hose just right got it to work
After bending bracket was tricky getting the brake line up in there
hooked up to prop valve
Well a long while ago I purchased an aluminum master cyl. from the Speedway sale Garage for a good price.Haven't opened the box until I was going to install it but found out the outlet ports are super small,too small for the 1/4" prop valve entrances.Instead of trying to send it back after so long and since it has outlet ports on both sides,decided to get some lines and fitting to plumb from both sides 3/16 to 1/4 line and then to prop valve and see if that works out.
fits inside 15" wheel although with a 1" wheel adapter
Had a time of it getting the right length brake hose for full travel and turning of wheel.Factory is 11" or so.The recommended Nova hose is 15" and is too long and folds into the tire.Ended up ordering a 12" braided hose http://www.ebay.com/itm/10-mm-stainless ... rmvSB=true
After bending the bracket and orienting the hose just right got it to work
After bending bracket was tricky getting the brake line up in there
hooked up to prop valve
Well a long while ago I purchased an aluminum master cyl. from the Speedway sale Garage for a good price.Haven't opened the box until I was going to install it but found out the outlet ports are super small,too small for the 1/4" prop valve entrances.Instead of trying to send it back after so long and since it has outlet ports on both sides,decided to get some lines and fitting to plumb from both sides 3/16 to 1/4 line and then to prop valve and see if that works out.