Re: 1980 Pontiac Sunbird Formula: Project Phoenix
Posted: Sun Dec 18, 2016 6:17 pm
Kevin if you have a spare or even beat up front facia, I would consider taking a mould off of it, then break out the air body saw and find the right places to cut fill with foam and re-glass to make your own style with a direct homage to the original, or just try and copy the front of that model car kit you(?) posted, that is exactly what I envision when you mentioned this endeavour, [I have seen a pic' of that kit before so it was hidden away in the back of my cluttered mind] either way I can't wait to see what way you go and then the finished results, this should be good you have some good starting places with those parts! as for your part number search did you go through the archived info here , on V8 Monza and HotRod mag's site somewhere inhere is the original part numbers that used to be from the original Chevrolet Power books, I'll check mine out if I can find it. Harry
Harry researched and found wrote:Kevin the "Chevrolet Power Book" shows pictures [wire frame drawing really] and states that the "IMSA" reduces drag 24% while increasing down-force for "Off-Highway Driving" but no #'s