I gently bumped the front air dam and broke it while trying to lower the car off the jack stands.. Cussed and threw things. Considered selling/giving to Bryan McCready. Left it alone for a few days. Came to my senses! Lol
Decided to see if I could get the part scanned and printed. I found a company in Denver that will scan it to a CAD file for printing. Originally thought it to be less than four hours to scan, at @125/hr, and touch-up the CAD file to get it ready to print a part. After removing the parts still attached, there are now seven larger pieces of the middle part of the front air dam, plus a lot a tiny bits that flaked-off. The two corner pieces are mostly intact. After discussion with the scanning company, the cost is likely to be over $1,000 to take the project all the way through printing.
Planning to have them scan the spoiler too. It is in good shape, but might as well get it scanned before it breaks. Should be cheaper to scan since it is flatter and in one piece. Have to see how broke I am after the air dam is done.
Once the file is made, I can have them, or anyone who has the printer, print one up. I will let you know the final cost so all can partake!