THM350 Dipstick ?

Archives of Virtual Vega Monza Club

Moderator: Moderators

THM350 Dipstick ?

Postby h-bot » Thu Aug 24, 2000 9:44 am

From: nt664_REMOVE_383732_THIS_@yahoo.com


What are some options for THM350 tranny dipstick
tubes? Mine came with a cobbled tube and I can't seem to
find any that come close to working. I would like to
find something cheaper than $56 for the flexible Lokar
dipstick. What is everyone else using?
Thanks,

Regards,
Elliot
1974 Vega Wagon 350/350


[This is message #199 by user nt664 on Yahoo! Club Virtual Vega Monza Club: http://clubs.yahoo.com/clubs/virtualvegamonzaclub ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


THM350 Dipstick ?

Postby h-bot » Mon Nov 06, 2000 3:51 pm

From: vegafrog_REMOVE_861714_THIS_@yahoo.com


I know this may be a little late but I thought I
would pass it along anyhow. I took my stock THM350 tube
and measured the length, then cut about six inches
out of the middle where all the bending takes place
which left me with about four inches of the part that
goes into the transmission. I then slipped a piece of
5/8 hose onto this piece and clamped it,(hose length
approx.8 in.)then I slipped the upper part of the dipstick
into the hose and measured it and adjusted it to
proper length then clamped it. Good zip ties work fine.
Hope this helps it worked for me.


[This is message #216 by user vegafrog on Yahoo! Club Virtual Vega Monza Club: http://clubs.yahoo.com/clubs/virtualvegamonzaclub ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

THM350 Dipstick ?

Postby h-bot » Tue Nov 07, 2000 1:57 pm

From: denisst78_REMOVE_598017_THIS_@yahoo.com


Another idea may be to use
dipstick made by LOKAR
it`s a braided stainless stell
flex tube

Denis


[This is message #217 by user denisst78 on Yahoo! Club Virtual Vega Monza Club: http://clubs.yahoo.com/clubs/virtualvegamonzaclub ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


Return to Virtual Vega Monza Club

Who is online

Users browsing this forum: No registered users and 4 guests