From:
vswv8_REMOVE_745988_THIS_@yahoo.com
there's alot of metal to trim off a vega front
end to be able to get the nose to tilt.and the
biggest thing is you should re-brace the uni body front
inner fender wells along with haveing to trim the metal
on the sides of the cowl, alll the original core
area is problem too.i guess it has probably been done
, but my vega had fiberglass tilt one peice nose
and i used it on different vega and ..............
well lets just say it lost lots of support metal out
of the front so......better figure on installing a
full cage, mainly for front structual support and / or
some type of bracing to the innerfender
wells......look in the gmhbodypicclub1 and look under vswv8's
wagon and theres a picture of my first body with the
nose in the tilted position. good luck mark
[This is message #317 by user vswv8 on Yahoo! Club Virtual Vega Monza Club:
http://clubs.yahoo.com/clubs/virtualvegamonzaclub ]