building a buick V6

[h-bot]

From: locomonza_REMOVE_686160_THIS_@yahoo.com


Thank you Phantom402 for your answer, but the V8
have big sway bars,I have a 1" front and I need small
diameter on the rear.
I'm building a 231 v6, I know the
factory HP is 110 hp.
This is the Hi Performer parts
I'll put on it:
FORGED PISTON .030 OVER
HOLLEY
1850 4 BBL VAC SEC 600 CFM.
EDELBROCK COMBO,
PERFORMER ALUMINUM INTAKE, EDELBROCK CAM 204-214 AND
SPRINGS.
MSD 6A IGNITION.
How much HP and TORQUE I will
gain with all these parts???
Please let me know if
all these parts are worth the money.
Thank
you
Alex


[This is message #237 by user locomonza on Yahoo! Club Buick Skyhawk owner's Club: http://clubs.yahoo.com/clubs/buickskyhawkownersclub ]

[h-bot]

From: LinderJW_REMOVE_524311_THIS_@yahoo.com


they are good parts i don't know how much power
you will gain, i built mine with a kinney bell
manifol and a carter afb 675 cfm 4 bbl, comp cam, portand
polished heads, ete, the works, and trust me you will have
alot of power, mine scares the hell out of me
sometimes, and my uncle that is the head of the acura
trining devition in chicago siad mine should be in the
600-700 range no power but i have really doen aton to it.
good luck but if you havn't perchest the manifold yet
i would look in to kenneyt bless stuff there
incredible


[This is message #239 by user LinderJW on Yahoo! Club Buick Skyhawk owner's Club: http://clubs.yahoo.com/clubs/buickskyhawkownersclub ]