From: cv2037_REMOVE_546659_THIS_@yahoo.com
The MAP sensor looks untouched. Haven't looked at the ECU idle pot. I
have noticed a little leak that sounds like it is coming from one of
the PAIR tubes at the headers. I know one of the tube tips is
corroded. I wonder if this could be causing some of my HC problem.
I'll check the check valves and vacuum switch on the PAIR system.
I replaced plugs, plug wires, distributor rotor & cap tonight. Didn't
do the coil though. Tomorrow I'll warm it up and see if I notice any
obvious changes.
[This is message #10270 by user cv2037 on Yahoo! Group Cosworth Vegas: http://groups.yahoo.com/group/cosworthvegas ]