Posi for 7.5

[h-bot]

From: theodorracer2002_REMOVE_696337_THIS_@yahoo.com


go to ebay about 4 units there for 26 spline.


[This is message #34282 by user theodorracer2002 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: wildman923_REMOVE_565504_THIS_@yahoo.com


I know my 75 Notchback Sedan has 26 spline axles.
BOB


[This is message #34284 by user wildman923 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: CJBIAGI_REMOVE_167515_THIS_@yahoo.com


Yes, H-Bodies with 7.5" rears have 26 spline axles. Clyde


[This is message #34285 by user CJBIAGI on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: mimibuick_REMOVE_545778_THIS_@yahoo.com


Will any 7.5 inch 26 spline fit a Monza?
Just
checking as I am still looking for a Posi unit for my 75
MOnza 2+2 V8.

ALSO UNCW (MY SCHOOL) JUST UPSET
#4 USC

GO
SEAHAWKS!!!!!!!!!!!!!!!!!!!!!!!!!!!


[This is message #34290 by user mimibuick on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: ciddlyman_REMOVE_911431_THIS_@yahoo.com


i am in the process of putting one in this week.
most 7.5's carriers will fit. if the gears and pinion
are out of a camero or s10 then you will probably
have to turn the pinion down to match the existing
bearing in your housing. thats what i ended up doing.
much easier then trying to find a bearing with the
right inner and outer race. i am keeping the original
bearing size the existing rear end.


[This is message #34324 by user ciddlyman on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]