From:
vegadad_REMOVE_279588_THIS_@yahoo.com
Paul,
What year is your Vega? If it is a 71-74
it has a 4 link suspension in the rear and a 6.5
ring and pinion set. If this is what you have, you'll
have to switch the control arm mounts to a new rear
end. In this case you'd may wish to get the Don Hardy
mounts from Bob Gumm, if he sells them through his site.
These could then be welded on an S-10 rear end as a
complete unit. Otherwise you'll have to grind the welds
carefully and remove the mounting brackets from your
existing rear end. Then have them welded to the new
housing.
john b. (in Virginia)
[This is message #34662 by user vegadad on Yahoo! Club GM HBODY:
http://clubs.yahoo.com/clubs/gmhbody ]