parts

Archives of GM H-Body Club

Moderator: Moderators

Parts

Postby h-bot » Sat Feb 26, 2000 11:21 am

From: zeeshome_REMOVE_493364_THIS_@yahoo.com


I am building a 73 Vega Drag car. I have some
stock pieces I will not be needing. e-mail me at
zeeshome@aol.com if interested in parts. Have Hood
no rust.
Fenders no rust holes. Rear spoiler. Dash with no guages.
Wiring harness complete. front grill etc etc.


[This is message #7044 by user zeeshome on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


PARTS

Postby h-bot » Thu Jun 01, 2000 11:55 pm

From: calgary_spyder_REMOVE_295475_THIS_@yahoo.com


I'm off to an isolated little auto-wrecker site
this weekend. I found this place when I was on
Holidays last fall but it's so far away I haven't been
back since. They had 3 intact H-bodies (a 75 Vega GT
HB, a 77 Astre HB, a 79 Astre HB) and a 77 Monza
Spyder HB (not intact). Anybody need parts? I'll only
charge what they charge me plus shipping. E-mail me only
if you are serious. I'll be gone about a week so be
patient.
Denis


[This is message #9404 by user calgary_spyder on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

PARTS

Postby h-bot » Fri Jun 02, 2000 9:24 am

From: JPB04619_REMOVE_242909_THIS_@yahoo.com


whats your email address??????


[This is message #9409 by user JPB04619 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

PARTS

Postby h-bot » Fri Jun 02, 2000 2:35 pm

From: calgary_spyder_REMOVE_305320_THIS_@yahoo.com


John - My E-mail address is in my profile. Just double-click on the red Calgary_Spyder at the top of this message.
Denis


[This is message #9415 by user calgary_spyder on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

parts

Postby h-bot » Fri Aug 18, 2000 9:02 pm

From: mr_phelcher_REMOVE_554987_THIS_@yahoo.com


hey everyone ,i have some thing`s for sale. i have a 350 tailshaft housing for monza with holes,i have factory oil pan,factory mounts,headers,etc.,----Keith Hockenberry


[This is message #11197 by user mr_phelcher on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

parts

Postby h-bot » Fri Aug 18, 2000 10:59 pm

From: mahoy78spyder_REMOVE_472402_THIS_@yahoo.com


Keith, email more info about your headers for sale... mahoy78spyder@yahoo.com Might be worth looking at since you're just down the road.

Ken


[This is message #11200 by user mahoy78spyder on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

parts

Postby h-bot » Fri Aug 18, 2000 11:12 pm

From: mr_phelcher_REMOVE_350818_THIS_@yahoo.com


not sure what brand the headers are but they are
in good shape,they are 3-peice that have 1 pipe
exiting through the fenderwell,---i also have a 153 tooth
flywheel with brand new clutch and pressure plate,i have a
bellhousing,and driveshaft`s, and 5-lug re-drilled by moser
rotors.---Keith Hockenberry


[This is message #11201 by user mr_phelcher on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

parts

Postby h-bot » Fri Aug 18, 2000 11:19 pm

From: mahoy78spyder_REMOVE_920269_THIS_@yahoo.com


sounds like they're Hooker 2129's (1 3/4" primaries, don't work w/ factory V8 mounts, only front mounted transdapt style mounts)

Ken


[This is message #11202 by user mahoy78spyder on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

parts

Postby h-bot » Fri Aug 18, 2000 11:36 pm

From: thechevynut_REMOVE_143953_THIS_@yahoo.com


How much for the mounts?


[This is message #11205 by user thechevynut on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

parts

Postby h-bot » Sat Aug 19, 2000 1:03 am

From: mr_phelcher_REMOVE_745122_THIS_@yahoo.com


i used factory mounts with these headers but i had to modify one side runs through the center of the mount.-----keith hockenberry


[This is message #11212 by user mr_phelcher on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

parts

Postby h-bot » Sat Aug 19, 2000 1:06 am

From: mr_phelcher_REMOVE_411600_THIS_@yahoo.com


i have two sets of frame mounts.one set is
factory the other is made to use solid engine mounts and
they set it up a lil higher to avoid oilpan to
grease-zerk contact...-----keith hockenberry(make an offer)


[This is message #11213 by user mr_phelcher on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

Parts

Postby h-bot » Fri Oct 06, 2000 1:25 am

From: glwatty_REMOVE_550379_THIS_@yahoo.com


I have a pretty nice red dash for a '75 HB only fits that year and model I think.


[This is message #12712 by user glwatty on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

Parts

Postby h-bot » Fri Oct 06, 2000 7:28 am

From: CJBIAGI_REMOVE_678723_THIS_@yahoo.com


I believe that you are correct about the 75's being different. Exactly what shape is this in? Any cracks or imperfections that couldn't be covered by redying? What do you want for it? Clyde


[This is message #12715 by user CJBIAGI on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

Parts

Postby h-bot » Fri Oct 06, 2000 9:48 am

From: v8monza75_REMOVE_303160_THIS_@yahoo.com


What condition are the parts. Is it complete w. meters, trim etc.

Sven


[This is message #12717 by user v8monza75 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

Parts

Postby h-bot » Fri Oct 06, 2000 8:23 pm

From: glwatty_REMOVE_997006_THIS_@yahoo.com


The '75 I listed is a Monza 2+2. I have the dash,
120 mph speedo ,tach and guages. The dash has a
couple of cracks, I could post a picture.Is the'75 Monza
dash the same as a '75 Vega GT dash?

Garrett


[This is message #12728 by user glwatty on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

PreviousNext

Return to GM H-Body

Who is online

Users browsing this forum: No registered users and 3 guests

cron