springs

Archives of GM H-Body Club

Moderator: Moderators

springs

Postby h-bot » Mon Apr 05, 1999 10:20 pm

From: monza_madness_REMOVE_621990_THIS_@yahoo.com

Another suggestion:

If you want a stiff
ride and the right height, cut the V-8 springs to
lower the car. Do NOT use a cutting torch to cut the
springs though. The heat will mess up the temper. Use a
saw.

monza_madness (Roger)


[This is message #863 by user monza_madness on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


springs

Postby h-bot » Tue Jun 22, 1999 7:11 pm

From: roadhawk_79_REMOVE_586418_THIS_@yahoo.com


anyone have any DOBI springs for monza's?


[This is message #1918 by user roadhawk_79 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

springs

Postby h-bot » Wed Jun 23, 1999 12:14 pm

From: v8hawk_REMOVE_510493_THIS_@yahoo.com


I talked to Dobi about 1 month ago and they still have the springs!!


[This is message #1924 by user v8hawk on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

springs

Postby h-bot » Sun Mar 17, 2002 11:02 pm

From: v8vega69_REMOVE_453675_THIS_@yahoo.com


hi, is springs and things a good place to get v8 vega springs? i looked at the site,and they looked ok. any coments would be helpful...its for a 74 vega 350...tanks,dave


[This is message #34545 by user v8vega69 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


Return to GM H-Body

Who is online

Users browsing this forum: No registered users and 6 guests

cron