(no subject)

[h-bot]

From: roadhawk_79_REMOVE_384237_THIS_@yahoo.com


hey mahoy thanks alot you helped me alot!!!!


[This is message #2166 by user roadhawk_79 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: mich_southpaw46_REMOVE_677866_THIS_@yahoo.com


I was telling my son about the nitrous explosion
today, and he told me his NOS bottle is supposed to
bleed off somewhere around 1275/1300 PSI. When he went
to Beech Bend raceway over the Labor day weekend, he
said the heat from the sun caused the pressure in his
bottle to get so high the solenoids wouldn't open. He
pulled the bottle out and ran cold water on it to cool
it down. When he checked the pressure on his gage,
it pegged the needle. His gage goes to 1500, and he
said the pin that the needle was up against was
somewhere around 1800? He is writing to NOS and asking "waz
up wid dis?"

I thought that the pressure
relief valve is supposed to do just that.


[This is message #3662 by user mich_southpaw46 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: TheAstre_REMOVE_426105_THIS_@yahoo.com


Here's a picture of a Nomad Vega.
<a href=http://members.aol.com/JacobLip/wagons/nomadbrn.jpg target=new>http://members.aol.com/JacobLip/wagons/nomadbrn.jpg</a>
Note the panels used to reverse the slope of the door pillar.
tlippert@moen.com


[This is message #4290 by user TheAstre on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: ssean72_REMOVE_645594_THIS_@yahoo.com


I wish I would have known that they were so rare,
because I pasted one out a few months ago that was in
really gooood shape. The guy bought it new and was
selling it for 1000. I remember why I didn't buy it it
had some noise in the bottom end and I wanted some to
drive back and forth to work for when I start taring
down the vega for resto. Darn I'm upset know. Well
maybe I can still get it if he still has it Ill have to
ck. Sean


[This is message #4303 by user ssean72 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: mahoy78spyder_REMOVE_493921_THIS_@yahoo.com


&lt;&lt;quoted from original>>
>I'm
looking for a nice rear hatch "bowtie"

>emblem/lock cover. GM #358316.

Contact Joey (jed140)
about this. As I recall, he has a set of N.O.S. Chevy
emblems (front & back) for sale.

Ken


[This is message #5087 by user mahoy78spyder on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: vegacharger_REMOVE_944510_THIS_@yahoo.com


The original "gone in 60 seconds" was shot where
I grew up...watched it for the first time about a
year ago and flipped! there is a scene where the guy
jumps a couple of cars while going down a hill, I went
up that hill everyday!
it was shot in all parts
of the south bay
Torrance, long beach, redondo
beach, carson...cool stuff.


[This is message #16365 by user vegacharger on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: doogiediamond_REMOVE_266189_THIS_@yahoo.com


congrats!!!
I just had a similar experience...
My wife just gave birth 13 days ago to a Beautiful
baby girl and 8 days ago My Vega took it's first run
down the road with it's new V-6
I would have to
agree with you "LIFE IS GOOD"
Doug


[This is message #19681 by user doogiediamond on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: TimMcCabe99_REMOVE_837487_THIS_@yahoo.com


Robert,

I used the F-body exhaust
manifolds on my Tuneport, I had to grind a bit off the left
side to clear the steering. The F-body headers would
never clear without some heavy modifications.


Tim


[This is message #21808 by user TimMcCabe99 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: nickster1_99_REMOVE_497152_THIS_@yahoo.com


I tried s-10 conversion headers w/ stock mounts. the passengers side would work but the drivers hits the fendewell and the master cyl.

-Nick


[This is message #21813 by user nickster1_99 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: octowman_REMOVE_288476_THIS_@yahoo.com


it's back


[This is message #33584 by user octowman on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: fyrftr50_REMOVE_565149_THIS_@yahoo.com


"Smart people can't be bothered with that lowered NOS rice burning crap" ;)
Bryan


[This is message #33585 by user fyrftr50 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: billy_b_85222_REMOVE_804701_THIS_@yahoo.com


Dude,take your ricer crap elswhere!


[This is message #33609 by user billy_b_85222 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: chevyman43055_REMOVE_672038_THIS_@yahoo.com


would be funny if you ran a red light in your
rice burner and i was coming the other way in my
crewcab F350 powerstroke,6000lbs of rolling thunder would
absolutley punt your ass thru the uprights.instead of your
pants hanging down to your knees while you listen to
your urban boom
"music" (that i can hear 2 miles
away) your nappy drawers would be hangin out the
passenger side window.just my 2


[This is message #33612 by user chevyman43055 on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: monza75tc_REMOVE_609290_THIS_@yahoo.com


How about one of the founders booting this dude out. We dont have to be reminded every day about his lowrider site, especially when we don't wanna go to it. Just my $0.02
Dick


[This is message #33620 by user monza75tc on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]

[h-bot]

From: speedy72vega_REMOVE_466900_THIS_@yahoo.com


I say we all hide our e-mail addy's in our profiles, then go to that site and just FLOOD the crap out of their bulletin board!! LOL.
Anyone with me?????

Rob.


[This is message #33641 by user speedy72vega on Yahoo! Club GM HBODY: http://clubs.yahoo.com/clubs/gmhbody ]