From:
kcmonza_REMOVE_611918_THIS_@yahoo.com
--- In <a href="/group/gmhbody2/post?protectID=123232214254193154187175203245129208071">gmhbody2@y...</a>, bbcvegawagon <<a href="/group/gmhbody2/post?protectID=091233212180056219138097203245129208071">no_reply@y...</a>> wrote:
> --- In <a href="/group/gmhbody2/post?protectID=123232214254193154187175203245129208071">gmhbody2@y...</a>, kcmonza <<a href="/group/gmhbody2/post?protectID=091233212180056219138097203245129208071">no_reply@y...</a>> wrote:
> > What type water pump should be used or can be used as a
> replacement
> > pump. Have a 350 installed using pusher fan on V8 radiator but
> just
> > not doing the job. I want to use a flex fan but not quite enough
> > space. Any suggestions.
> > Thanks
>
> Are you using a long or short water pump?
> There is a difference. Short one has the back cover of the pump
> right against the timing cover. Long water pump has a good inch
> between the back of the pump and the front face of the tinming gear
> cover.
I originally was using a long pump but have since installed a short
one with a flex fan. Cooling much better.
[This is message #259 by user kcmonza on Yahoo! Group GM HBODY 2:
http://groups.yahoo.com/group/gmhbody2 ]