The Official H-Body Internet Community

Hi
the link is dead
if you want I have server space you can use.
send over any pdf's you have!!
Paul in Iowa

The link is back up!

Save the trouble of cutting the floor. I bought some subframe connectors from SSFab and they work fantastic. just gotta weld them in and thats it. no cutting at all. I put them on my 72 vega and my 74 vega wagon. Straight launch everytime! only $125 a piece.. that includes the shipping too.

here is there website if anyone wants to buy
http://www.southsanantoniofab.com

How about some pictures?

One from the site.

rocko1159 wrote:Save the trouble of cutting the floor. I bought some subframe connectors from SSFab and they work fantastic. just gotta weld them in and thats it. no cutting at all. I put them on my 72 vega and my 74 vega wagon. Straight launch everytime! only $125 a piece.. that includes the shipping too.

here is there website if anyone wants to buy
http://www.southsanantoniofab.com

Are those the ones that hang down about 3 or 4 inches below the pinch weld, looking from the side of car?

Yeah, I meant pictures of them installed on the car. How far do they hang down and what do they look like from the side?

80 MONZTA wrote:

rocko1159 wrote:Save the trouble of cutting the floor. I bought some subframe connectors from SSFab and they work fantastic. just gotta weld them in and thats it. no cutting at all. I put them on my 72 vega and my 74 vega wagon. Straight launch everytime! only $125 a piece.. that includes the shipping too.

here is there website if anyone wants to buy
http://www.southsanantoniofab.com

Are those the ones that hang down about 3 or 4 inches below the pinch weld, looking from the side of car?

Just checked right now.. These subframe connectors are a little less than 2 1/2 inches below the pinch weld and are not noticeable any more than the Competition Engineered subframe connectors I have on my 72 nova which are about the same 2-3 inches below the pinch weld. So rest assured these are no worse than Competition's or any other

SWT Racing wrote:Since people are always asking me for the Vega subframe connector plans, here is a link to the drawing. Please note that the connector shown is the right-hand side connector. The LH side would be the mirror image.

http://www.hangar18fabrication.com/misc_images/vegaframe.pdf

Just used these plans fit great

Will these fit a Monza also?
Merle

my79monza wrote:Will these fit a Monza also?
Merle

Mine went in a Sunbird

flathead52 wrote:

my79monza wrote:Will these fit a Monza also?
Merle

Mine went in a Sunbird

Web site says 71-77 if you installed a set on your 79 then they actuall fit 71-80 Monza, Sunbird, stc
Are you satisfied with the finished product?
would you recomend them to others?
Sorry for the questions but would like to know before buying a set
Merle

my79monza wrote:

flathead52 wrote:

my79monza wrote:Will these fit a Monza also?
Merle

Mine went in a Sunbird

Web site says 71-77 if you installed a set on your 79 then they actuall fit 71-80 Monza, Sunbird, stc
Are you satisfied with the finished product?
would you recomend them to others?
Sorry for the questions but would like to know before buying a set
Merle

Merle
We built a set from the plans listed at the start of the topic. We cut them 1/2 longer on all sides then the plans, then cut to fit our car. This was my first time went well.

i bought a set a few weeks ago from south san antonio fabrication.
i would say i am very satisfied with the finished product, the connectors come painted black and are put together really well
also ther do a great job of responding fast. i contacted them and recieved an e-mail with a few hours
so overall yes i would reccomend them to others. i have 3 vegas, 2 have alstons subframe and the other has the ones from south san antonio fabrication.
i wish i knew about these back then. it saved me time having not to cut the floor especially on my cars because the floor pans are more thsn great
for a total of $125 including shipping it was a deal
---kyle morgans

kyle can you post some pics of these connectors installed, and was there any problems or tricks to install them thanks art