Page 1 of 4
Bolt-In Rear Frame
Posted:
Fri Dec 07, 2007 10:44 pmby res0o7eb
Not sure if this is drag race material, but has anybody tried this?
This is a set of prints to build a rear frame system to install a narrowed cut down 10 or 12 bolt or ford 9 in. in a Vega.
this narrow rear end frame will take up to a 12 in. wheel all under finder wells.
to be used with all leaf springs rear ends
the frame will bolt right in with no welding.
ten sets of prints left shipping is $1.00 for each set.
http://sanantonio.craigslist.org/pts/471123004.html
Posted:
Sat Dec 08, 2007 2:18 pmby flracer
left a reply that i wanted a set of prints,no response yet.
wasnt there someone parting a Vega on ebay few months ago that had a frame like this for sale?
would love one as well
Posted:
Tue Dec 25, 2007 8:46 pmby grumpy d-bone
please let us know if you get a responce thanks
Posted:
Tue Dec 25, 2007 9:43 pmby flracer
Ive got the print if you want a copy just give me an email or postal address.This is 11x17 on a drafting sheet.IM going to see about making some copies actual size tomorrow.If i can get some made i can mail you a copy [fits in a business envelope].
Dont have any idea how to post here or i could do that.
Have a good one.
Richard
bolt in rear frame
Posted:
Wed Dec 26, 2007 9:21 amby cacmanjr
I would like a copy if possible. Please email to
cacmanjr@aol.com. Thanks!
Posted:
Wed Dec 26, 2007 11:11 amby grumpy d-bone
awsome thank you richard please send to donnie williamson 138 black bear court dripping springs texas 78620, how do they look?
Posted:
Wed Dec 26, 2007 11:12 amby grumpy d-bone
id love one actual size let me know the cost and ill send you a moneyorder thanks again
Posted:
Wed Dec 26, 2007 12:26 pmby flracer
Carl i attempted to email to you but wouldnt go through.Will try again when wife gets home.It will be two scans because of size.
Donnie no problem,the guy i got this from is in Bulverde Tx. dont know how close you are.Going to try office depot tomorrow morning for copies.
Its a hand drawn sheet from an actual frame [i know this guy had a frame like this for sale on ebay a while back].Shows demensions of frame but not how to install.
Have a good one.
Richard
Posted:
Wed Dec 26, 2007 12:57 pmby cacmanjr
Thanks, Richard. You could also try my work email. It is
ccreque@transitchicago.com. Thanks again!
Posted:
Wed Dec 26, 2007 2:43 pmby grumpy d-bone
bulverdie is just down the road from me about 40 miles do you have a name or number of this guy? feel free to call me with it if so im home all this week 512-894-4047 call me collect thanks again
Posted:
Wed Dec 26, 2007 11:50 pmby Monzamouse
Grumpy I saw the Frame plans on Craig's list sale-471123004
@craigslist.org $10 one dollar shipping. His e-mail is
sixgun@gvtc.com. I asked him if you had to remove any of
the body and he said that the spare tire well had to go and
the inside wheel wells if you were putting a real wide tire.
I asked for a picture of a Vega that this had been installed
in but he has not sent the pictures yet.
Thanks
Larry
Posted:
Thu Dec 27, 2007 12:36 pmby flracer
Donnie got some copies made will mail one to you shortly.
Carl cant get one to go email give me your mailing address i will send one.
my email:
flracer65@yahoo.com
Richard
Snail Mail Address
Posted:
Thu Dec 27, 2007 5:12 pmby cacmanjr
Address sent. Thanks a bunch, Richard.
Posted:
Thu Dec 27, 2007 6:24 pmby BigTruckDriver
Would like to see pics installed. I wonder if you have to cut into the floor board for the step up.
Posted:
Thu Dec 27, 2007 7:21 pmby spyder_xlch
What's the posibility of posting the plans here? That should work on a Monza too right?