tire fittment

Moderator: Moderators

tire fittment

Postby dragradialvega » Thu Dec 18, 2008 4:53 pm

i was wondering if anyone has ever tried to fit a 275 60 mt drag radial onto the stock wheel wells on a stock suspension vega with an 8 or 10 inch wide rim....if so what backspace and some piks would be helpful also.....
1977 Pontiac Astre
"SOLD"
Lookin for a STOCK vega or astre,
car or wagon doesent madder for
a builder.
j.m.wagner@hotmail.com
dragradialvega
 
Posts: 35
Joined: Sun Nov 30, 2008 7:14 pm
Location: Southern Illinois


Re: tire fittment

Postby speedphreake » Thu Dec 18, 2008 8:25 pm

I had a 275/50/15 drag radial i used to run on my vega in my avatar. It stuck out quite a bit with a 9" rim, stock rear, stock suspension.
71 Vega hb
11 2500HD duramax
User avatar
speedphreake
 
Posts: 634
Joined: Fri Dec 22, 2006 11:12 pm
Location: Cape Cod, MA

1971 Chevrolet Vega

Re: tire fittment

Postby dragradialvega » Thu Dec 18, 2008 8:49 pm

the 275/60's are a little skinnier than the 50's.......so it will fit...?
1977 Pontiac Astre
"SOLD"
Lookin for a STOCK vega or astre,
car or wagon doesent madder for
a builder.
j.m.wagner@hotmail.com
dragradialvega
 
Posts: 35
Joined: Sun Nov 30, 2008 7:14 pm
Location: Southern Illinois

Re: tire fittment

Postby jcapelo » Fri Dec 19, 2008 12:38 am

i run 255-60-15 kick ass looks good too on a 15x8 rally
jcapelo
 
Posts: 20
Joined: Mon Apr 21, 2008 9:50 pm

Re: tire fittment

Postby spencerforhire » Fri Dec 19, 2008 7:27 am

275/60's are almost 28' tall; I hope you like lots of "rake"! Even if you can get the car high enough, I suspect you would still have to trim the wheel opening for clearance, especially at the lower front.
The "fleet"-
72 Vega HB Drag Car -383/'Glide/9"(9.35@146.19)(5.94@117.28 1/8th)
77 Vega Estate wagon- project(someday)will have TPI305/T-5, S-10 spindles/axles
76 Vega GT- 400/4spd/9" retired from active duty(rusty)
06 Silverado 2WD ex.cab daily
03 Silverado 2WD ex.cab (retired)
06 Haulin' 20ft enclosed car transporter
06 GMC Canyon Shop truck
07 Colorado project( 5.3 4L60e swap)
99 Saturn SL1- wife's car
01 Saturn SC2- son's project
07 Saturn Ion Redline project
and 4 more Saturn "parts cars"
Note- the very act of listing all of these has made me realize I have some kind of problem.....

Visit http://www.spencerforhire.ca
User avatar
spencerforhire
 
Posts: 2442
Joined: Mon Jul 03, 2006 9:02 pm
Location: Halifax, Nova Scotia

1972 Chevrolet Vega Hatchback

Re: tire fittment

Postby waybad » Fri Dec 19, 2008 12:33 pm

jcapelo wrote:i run 255-60-15 kick ass looks good too on a 15x8 rally

Any pictures of this set up??
TC
Tinker
User avatar
waybad
 
Posts: 1794
Joined: Sun Feb 24, 2008 12:03 am

Re: tire fittment

Postby dragradialvega » Fri Dec 19, 2008 10:12 pm

spencerforhire wrote:275/60's are almost 28' tall; I hope you like lots of "rake"! Even if you can get the car high enough, I suspect you would still have to trim the wheel opening for clearance, especially at the lower front.


i have had a 275 on my astre and it fit and set good but its backhalfed with extended wheelwell openings...i usually run a 315
1977 Pontiac Astre
"SOLD"
Lookin for a STOCK vega or astre,
car or wagon doesent madder for
a builder.
j.m.wagner@hotmail.com
dragradialvega
 
Posts: 35
Joined: Sun Nov 30, 2008 7:14 pm
Location: Southern Illinois

Re: tire fittment

Postby cadillac_man06 » Thu Jul 02, 2009 10:56 pm

i have the mt dfrag radial 275-50-15 on my vega on 8 inch wheel and 1/2 inch spacer and 4.50 inch back space wheel and it fits perfectly and doesnt stick out it is an 11 inch slick and 26 inch tall.
User avatar
cadillac_man06
 
Posts: 108
Joined: Mon Jul 30, 2007 8:00 pm
Location: Spring Hill, Kansas

1973 Chevrolet Vega GT

Re: tire fittment

Postby waybad » Fri Jul 03, 2009 8:07 am

cadillac_man06 wrote:i have the mt dfrag radial 275-50-15 on my vega on 8 inch wheel and 1/2 inch spacer and 4.50 inch back space wheel and it fits perfectly and doesnt stick out it is an 11 inch slick and 26 inch tall.



do you have any side/ back pictures of this set up? :dance:
Tinker
User avatar
waybad
 
Posts: 1794
Joined: Sun Feb 24, 2008 12:03 am

Re: tire fittment

Postby cadillac_man06 » Fri Jul 03, 2009 11:19 pm

not yet. im in the process of reinforcing my rear end mounts. so it might be a week or two, but it looks bad ass with those big tires tucked under the fender.
User avatar
cadillac_man06
 
Posts: 108
Joined: Mon Jul 30, 2007 8:00 pm
Location: Spring Hill, Kansas

1973 Chevrolet Vega GT

Re: tire fittment

Postby spencerforhire » Sat Jul 04, 2009 8:02 am

I gotta see this- If a 275/60-15 will fit in a stock Vega wheel well, sign me up! I've got a bunch of them(that's what I run on my Suburban), so now I have to try them out on the wagon. I had planned on using 225/50-15's on the rear to keep the car low, but if there's a way to get more rubber in there...........
The "fleet"-
72 Vega HB Drag Car -383/'Glide/9"(9.35@146.19)(5.94@117.28 1/8th)
77 Vega Estate wagon- project(someday)will have TPI305/T-5, S-10 spindles/axles
76 Vega GT- 400/4spd/9" retired from active duty(rusty)
06 Silverado 2WD ex.cab daily
03 Silverado 2WD ex.cab (retired)
06 Haulin' 20ft enclosed car transporter
06 GMC Canyon Shop truck
07 Colorado project( 5.3 4L60e swap)
99 Saturn SL1- wife's car
01 Saturn SC2- son's project
07 Saturn Ion Redline project
and 4 more Saturn "parts cars"
Note- the very act of listing all of these has made me realize I have some kind of problem.....

Visit http://www.spencerforhire.ca
User avatar
spencerforhire
 
Posts: 2442
Joined: Mon Jul 03, 2006 9:02 pm
Location: Halifax, Nova Scotia

1972 Chevrolet Vega Hatchback

Re: tire fittment

Postby waybad » Sat Jul 04, 2009 8:41 am

Thanks,, i will also be waiting, patiently :bang: :bang: :bang: :bang: :bang: :mrgreen:
Tinker
User avatar
waybad
 
Posts: 1794
Joined: Sun Feb 24, 2008 12:03 am

Re: tire fittment

Postby waybad » Sun Jul 26, 2009 8:21 pm

cadillac_man06 wrote:not yet. im in the process of reinforcing my rear end mounts. so it might be a week or two, but it looks bad ass with those big tires tucked under the fender.



Any word on these tires fitting yet? :bored:
Tinker
User avatar
waybad
 
Posts: 1794
Joined: Sun Feb 24, 2008 12:03 am

Re: tire fittment

Postby TERROR » Sat Jan 08, 2011 6:27 pm

275/60/15 H&H's stock suspension 9" rear stock wheel tubs, pic in my sig
Image
TERROR
 
Posts: 26
Joined: Sat Feb 27, 2010 9:01 pm
Location: NY


Return to Racing Chassis

Who is online

Users browsing this forum: No registered users and 3 guests