Well as most know I have been really working my car this year which includes a ton of large wheelies and a few were rear bumper hitters that came down hard.
I used to use my limiters and have a couple of people help push the front suspension down so I could get the limiters to click in and held it down at that level but now the car just sites naturally in that position.
Front tires look crooked with top of the tires pointed in and bottoms out. Car is so low in the front naturally now that on side is less than a finger width from hitting the fender. I see the front of the frame rail on one side must have had some plates welded in like it was being reinforced and the spot welds popped and you can tell seam is sight at the top and spread about a half inch at the bottom type thing.
One time at the races a Vega guy was talking to me about it and how weak some parts are and how all Vegas end up in this stance.
If anyone knows the weak points or where I should be looking and spending my $ on please shoot me some info. I don't know if I'm bending frame rails or suspension parts or what.
Any info for a starting point would be great!