roll cage plates

Moderator: Moderators

Re: roll cage plates

Postby Rickracer » Tue Dec 03, 2013 7:48 am

That would depend on the tech guy inspecting them, but the vast majority would say NO lightening holes, it's the square inches of surface area that they are after, lightening holes would subtract from that.
Rickracer
ASE Master Auto Technician, 36+ years
'76 Vega Notchback, Twin Turbo 355/TH350 (soon to be a Powerglide w/Brake), 4 link, Koni Coilovers, 3.50 geared 9" w/Spool & Moser Axles, drag only, best all motor 1/8 mile pass to date, 6.90@99mph, 6.57@107.0 on a 60 shot, Best 1/4, 9.66@139.78, still tuning...
Project Album: http://s68.photobucket.com/albums/i4/Ri ... 20Begins/'
93 S10 RCSB, Hyd. Roller Vortec head 363 ci SBC, 2800stall lockup 700R4, LS Front Brakes, Narrowed F*rd Exploder 8.8 disc brake 3.73 posi rear, 8.0s@89 mph, (all motor, haven't sprayed it yet...)and tows the Vega to the track too
User avatar
Rickracer
 
Posts: 882
Joined: Mon Nov 30, 2009 9:11 am
Location: Kissimmee, Florida

1976 Chevrolet Vega


Re: roll cage plates

Postby megavega » Wed Dec 04, 2013 10:59 am

anorexicvega wrote:Do the 6x6 plates have to be solid? Can they have lightening holes in them?


no
1972 hatchback, 28,000 orig miles, 427BBC/twin T4 turbo's/T56 six speed/big wheels, lowered down pro touring style-work in progress....

1973 vega wagon-under the blue flame knife.
User avatar
megavega
 
Posts: 1249
Joined: Mon Jun 25, 2007 12:32 am
Location: Ohio

1972 Chevrolet Vega Hatchback

Re: roll cage plates

Postby anorexicvega » Thu Dec 05, 2013 1:32 am

That makes no sense at all, lets say you put 4-1" inch holes in the 4 corners of the 6x6 plate, and they were welded to the sheet metal in the holes, there's no way that's not stronger.
anorexicvega
 
Posts: 122
Joined: Sun Dec 30, 2012 3:46 pm
Location: Elizabethtown, Ky

Re: roll cage plates

Postby Fasterthansome » Thu Dec 05, 2013 7:54 am

Generally the plate will be going on top of sheet metal, it seems the idea is to strengthen the area the tube mounts and displace load. If you were to swiss cheese the plate it would be similar to mounting tube directly to sheetmetal and possibly ounch through. Just a guess though.
STRAIGHTLINE RACING
Home of the world's quickest stock suspension H-body
Fasterthansome
 
Posts: 749
Joined: Tue Jul 11, 2006 8:58 am

Previous

Return to Racing Chassis

Who is online

Users browsing this forum: No registered users and 1 guest