1 pc fiberglass nose

[LL8 Vega GT]

who has mounted one up without the factory front sheet metal?

any tips or pics? what worked well what did not?

[prolsc]

who has mounted one up without the factory front sheet metal?

any tips or pics? what worked well what did not?

The way it was mounted on my car there were 2 existing bolt holes left from the cal panel , then i made a metal frame out of conduit that you can get from lowes. Used the 2 existing bolt holes for the bumper brackets to attach it and welded 2 tabs on the outerside of the rollcage, which gave me 4 points up front, 2 per side. ,then used cross bar to make a center mounting point . If you look close right behind the front end is the frame I made. If you need better pics I can get you some.

[LL8 Vega GT]

Hey, thats nose looks fimiliar.... where have i seen it before???

I was thinking that your car had the factory sheet metal, but then i looked back at the pics you sent and it looks like the upper portion of the sheet metal was removed. I see the pice in the background, is that tipped up 90 degrees from how it actually went on the car?

you don't happen to have any pictures that show the nose on the car with that bracket mounted do you?

[prolsc]

Hey, thats nose looks fimiliar.... where have i seen it before???

I was thinking that your car had the factory sheet metal, but then i looked back at the pics you sent and it looks like the upper portion of the sheet metal was removed. I see the pice in the background, is that tipped up 90 degrees from how it actually went on the car?

you don't happen to have any pictures that show the nose on the car with that bracket mounted do you?

Yeah , it's just sitting on the ground in the picture . I can get you better pictures, I don't have the nose on the car right now, I can mount the frame on the front end of the car. If you look at the frnot end you got from me you will see the bolt holes drilled in the front of it where it attaches to the frame that mounts to the car. There is a total of 5 bolt holes on the front of the nose that the frame bolted to. 2 on the left 2 on the right and one in the center. I will get you pictures as soon as I can. I have the car stored at work.

[STSCowboy]

Where is the best place to get an Early 1 pc Front End? I just bought someones project car and it has no front end sheetmetal? What can I expect to pay and I am in California.

Thanks,

Joe

[LL8 Vega GT]

Where is the best place to get an Early 1 pc Front End? I just bought someones project car and it has no front end sheetmetal? What can I expect to pay and I am in California.

Thanks,

Joe

try this site
http://www.vfnfiberglass.com/site.htm