The Official H-Body Internet Community

Yea
I am still interested.
I'm going to go 8 1/2 S-10 rear end if I can find one. I will need brackets.
Anyone make em?
I need spring pads as well.
Bolting them up to Overkill rear arms.

I have the patterns made, I still need to get them drawn up in a format to send them to the waterjet guy. 1100kaw, I have a 8.5 s10 rear, disk brakes, aluminum calipers, 3.42 gov lock. all the e-brake stuff is removed, shoot me a pm if your interested. I also have a 28 spline 8.8, disk brakes, 4.10 limited slip, arp diff cap studs, a t&a cover girdle, that is 1 or 2 inches wider than the s10.

The s10 8.5 measures 54 1/2" wms to wms and the 8.8 measures 55 3/4" wms to wms.

I'm interested also.

And I've also been drafting in AutoCad for 29 years.
I'm a veteran Mechanical Designer, and will consider drawing these up if you can't get anyone close by.

If you are interested, you can trace them and provide the hole sizes, and I can make fabrication drawings from the tracings.
Also, assembly drawings showing the finished mount(s) as one piece, may be a possibility.

If you are interested, PM me.
70styleVega

70styleVega wrote:I'm interested also.

And I've also been drafting in AutoCad for 29 years.
I'm a veteran Mechanical Designer, and will consider drawing these up if you can't get anyone close by.

If you are interested, you can trace them and provide the hole sizes, and I can make fabrication drawings from the tracings.
Also, assembly drawings showing the finished mount(s) as one piece, may be a possibility.

If you are interested, PM me.
70styleVega

hey thanks 70style, I sent the patterns to the water-jet guy on Friday, im still waiting to see if he needs them drew up in autocad or the hand-drafted patterns will work.

OK.... I'll keep an eye on this thread.

I may have to go this route if I decide to change my vintage Ford Granada 8 inch to a Ranger 8.8, where there is a much better supply of low cost used posi units, gears, etc....

Keep up the good work, and don't forget to post motorhead porn.

70styleVega

Same here, I would be interested in a set too