3.36 used ring and pinion set from a 6.5 vega
rear end, with non-posi ring gear carrier, in good
pair of (left and right) backing
plates, shoes, and all hardware except e-brake cables.
(adjusters are good, about 5 years old) for the 9 x 1/12
rear brakes on a vega 6.5 rear end, about 1000 miles
of use since installation. (no brake drums though)
driveshaft, steel, 40 1/4" center to center, with good
u-joints & turbo 350 / 4 speed transmission yoke.
1 nos (still in gm box) 71-75 vega driver side
front brake caliper. $25.00
1 pair of 5 lug
monza ventilated rotors. at or a bit below low limit
for thickness. not grooved up, just need scotchbrite
2 posi units (both blown spider
gears) for 6.5 vega rear. $20.00
8.5 rearend out
of 75 camaro. not a posi, highway gears. would make
a good core for a narrowed rearend project.
chrome cover with chrome bolts for an 8.2 or 8.5 10 bolt
4.11 richmond gears, 2.73 factory
gears, open carrier, & 69 camaro factory axles, all for
a 8.2 10 bolt rear. make an offer on all or
1 pair of 9 1/2 x 2 cast iron brake drums, from a
75 camaro. blasted, painted, and turned.
all prices are "plus shipping".
<a href=http://www.geocities.com/jon72vega/my_page.html target=new>http://www.geocities.com/jon72vega/my_page.html</a>
[This is message #1135 by user jon72vega on Yahoo! Club HBOA Classified: http://clubs.yahoo.com/clubs/hboaclassified