Hello Monzamiler

Archives of HBOA Classified

Moderator: Moderators

Hello Monzamiler

Postby h-bot » Fri Apr 11, 2003 10:40 am

From: img width=12 height=12 border=0 src="http://opi.yahoo.com/online?u=fixitraw&m=g&t=0" alt=""_REMOVE_294880_THIS_@yahoo.com

I have a 75 2 + 2 V8. I have questions on the trans ( saganaw 4 speed )
and the rear end ( 8 1/2" cover, no posi, 2.56 ratio ). How strong are they,
and can they hold up. My plan is to replace the 305 2bbl. with a 355 TPI
motor. I know I'll need to try the frame together ( is there a kit ? ). I am
in the process of rebuilding the front end ( all poly ) and going to a 5 lug
wheel. Any info you can give me will help. Thanks Ron W.
----- Original Message -----
From: monzamiler
To: <a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100044067234241188055054002143101114212152159127177">hboaclassified@yahoogroups.com</a>
Sent: Friday, April 11, 2003 5:34 PM
Subject: [HBOA Classified] Re: Town coupe spoiler


--- In <a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100044067234241188055054002143101114212152159127177">hboaclassified@yahoogroups.com</a>, "turbomonzatc" <<a href="/group/hboaclassified/post?protectID=203185178200159071249218046036129208">Iggy_47@h...</a>>
wrote:
> I want a spoiler for my 79 chevy monza town coupe simimlar to the
> one on the blue monza posted up on the www.v8monza.com picture page
> under the coupe section.
> Richard
> <a href="/group/hboaclassified/post?protectID=210185178200159071249218046036129208">iggy_47@h...</a>


Try this place. <a href="http://www.showcars-bodyparts.com/monza.html">http://www.showcars-bodyparts.com/monza.html</a>




Later, Randy


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
<a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100229198039027013117194194210025154176117218244103035095145170002076142111252040233011">hboaclassified-unsubscribe@yahoogroups.com</a>



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]




[This is message #1625 by user img width=12 height=12 border=0 src="http://opi.yahoo.com/online?u=fixitraw&m=g&t=0" alt="" on Yahoo! Group HBOA Classified: http://groups.yahoo.com/group/hboaclassified ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


Hello Monzamiler

Postby h-bot » Sun Apr 13, 2003 6:16 am

From: img width=12 height=12 border=0 src="http://opi.yahoo.com/online?u=monzamiler&m=g&t=0" alt=""_REMOVE_890380_THIS_@yahoo.com

--- In <a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100044067234241188055054002143101114212152159127177">hboaclassified@yahoogroups.com</a>, Ron Williams
<<a href="/group/hboaclassified/post?protectID=194143020078018132169154000115020126171098234046209130">rwilliams0855@c...</a>> wrote:
> I have a 75 2 + 2 V8. I have questions on the trans ( saganaw
4 speed ) and the rear end ( 8 1/2" cover, no posi, 2.56 ratio ).
How strong are they, and can they hold up. My plan is to replace the
305 2bbl. with a 355 TPI motor. I know I'll need to try the frame
together ( is there a kit ? ). I am in the process of rebuilding
the front end ( all poly ) and going to a 5 lug wheel. Any info you
can give me will help. Thanks Ron W.
> ----- Original Message -----
> From: monzamiler
> To: <a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100044067234241188055054002143101114212152159127177">hboaclassified@yahoogroups.com</a>
> Sent: Friday, April 11, 2003 5:34 PM
>
>
>
>
>Ron, Glad to see you have found yourself a Monza.I still have mine.
Just this past week I bought a 2003 Ecotec engine for it.

The trans will be fine as long as you don't plan to hit it with
500HP.The rearend is another story as it's a 7.5".You can put S-10
gears in your housing you'll need the Timken bearing and race to do
this.And up grade to 28 spline axle if you wish 89 and up carrier.It
should hold 400 + HP from what other members have said.Check the
early posts on this site for more info on bearing and race
numbers..As for 5 lug front and HD engine mounts check V8monza.com
for there kit.Let me know if you need anything else.

Thank's Randy




[This is message #1626 by user img width=12 height=12 border=0 src="http://opi.yahoo.com/online?u=monzamiler&m=g&t=0" alt="" on Yahoo! Group HBOA Classified: http://groups.yahoo.com/group/hboaclassified ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

Hello Monzamiler

Postby h-bot » Sun Apr 13, 2003 6:22 am

From: img width=12 height=12 border=0 src="http://opi.yahoo.com/online?u=monzamiler&m=g&t=0" alt=""_REMOVE_452136_THIS_@yahoo.com

--- In <a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100044067234241188055054002143101114212152159127177">hboaclassified@yahoogroups.com</a>, monzamiler <<a href="/group/hboaclassified/post?protectID=091233212180056219138097203245129208071">no_reply@y...</a>>
wrote:
> --- In <a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100044067234241188055054002143101114212152159127177">hboaclassified@yahoogroups.com</a>, Ron Williams
> <<a href="/group/hboaclassified/post?protectID=194143020078018132169154000115020126171098234046209130">rwilliams0855@c...</a>> wrote:
> > I have a 75 2 + 2 V8. I have questions on the trans (
saganaw
> 4 speed ) and the rear end ( 8 1/2" cover, no posi, 2.56
ratio ).
> How strong are they, and can they hold up. My plan is to replace
the
> 305 2bbl. with a 355 TPI motor. I know I'll need to try the frame
> together ( is there a kit ? ). I am in the process of rebuilding
> the front end ( all poly ) and going to a 5 lug wheel. Any info
you
> can give me will help. Thanks Ron W.
> > ----- Original Message -----
> > From: monzamiler
> > To: <a href="/group/hboaclassified/post?protectID=180181253237185153169232000026240089177100044067234241188055054002143101114212152159127177">hboaclassified@yahoogroups.com</a>
> > Sent: Friday, April 11, 2003 5:34 PM
> >

Ron, Sorry I missed the frame connectors.
<a href="http://southsidemachine.com/index.shtml">http://southsidemachine.com/index.shtml</a>
Alston in Ill. has some too.Sorry web address is not working
tonight. www.alstonracing.com

> >
> >
> >
> >Ron, Glad to see you have found yourself a Monza.I still have
mine.
> Just this past week I bought a 2003 Ecotec engine for it.
>
> The trans will be fine as long as you don't plan to hit it with
> 500HP.The rearend is another story as it's a 7.5".You can put S-10
> gears in your housing you'll need the Timken bearing and race to do
> this.And up grade to 28 spline axle if you wish 89 and up
carrier.It
> should hold 400 + HP from what other members have said.Check the
> early posts on this site for more info on bearing and race
> numbers..As for 5 lug front and HD engine mounts check V8monza.com
> for there kit.Let me know if you need anything else.
>
> Thank's Randy




[This is message #1627 by user img width=12 height=12 border=0 src="http://opi.yahoo.com/online?u=monzamiler&m=g&t=0" alt="" on Yahoo! Group HBOA Classified: http://groups.yahoo.com/group/hboaclassified ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


Return to HBOA Classified

Who is online

Users browsing this forum: Google [Bot] and 1 guest