From: nickster1_99_REMOVE_267837_THIS_@yahoo.com
Here's my thoughts on that. a stock monza/vega
caster spec. is -.8 degree +/- .5 degreee. if you do the
s-10 spindle upgrade(like i plan on doing)
the spec
for a s-10 is appx 3.5 degrees. I don't think this
would be a problem w/ the balljoints.
just in case
I'm using lifetime warantee moog parts.
[This is message #192 by user nickster1_99 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]