From: vega400_REMOVE_557790_THIS_@yahoo.com
This was as close as I could get without taking
too much materal from the control arm. It is a much
bigger joint.
I got the parts from Lane
Automotive. The part #'s for the ball joints are ALL 56218.
The sleeve is part #UBM 40-3301, as per. Bob
G.
The new upper is a stock S-10.
I was just
getting worried about all the talk about having too much
-caster from sag, or swapping upper control arms.
[This is message #230 by user vega400 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]