Front brakes upgrade (s-10)

[h-bot]

From: denisst78_REMOVE_545451_THIS_@yahoo.com


Use the spindel and brakes from a s-10 truck

(g-bodies also use the same spindels)

for the
upper ball joints:
weld shut the 2 rear mounting
holes,
use the boot retainer as a template and
redrill
the 2 rear holes
enlarge the large hole whit
a die grinder

for hte lower ball joint:

you can weld a new larger sleeve to accept the

s-10 ball joint or
buy some ball joint adaptors
that will adapt
monza ball joint to the s-10
spindels

Denis


[This is message #370 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]