RUB RUB!

[h-bot]

From: birdman8099_REMOVE_978960_THIS_@yahoo.com


Anyone had any problems with there centerlink
rubing on the pass. side tierod link after s-10
conversion. Mine rubs the tie rod right were the pitman arm
is attached. this is I'm sure, because the s-10
spindles have longer tierod arms. It only rubs at one
point from lock to lock and thats right when the pitman
is lined up with the steering box with the front
wheels strait.you can't feel it in the steering wheel
but it rubs enough to cause the tierod to deflect a
slight amount. I used my die grinder to take off about

a 16th of an inch off the centerlink to get it to
go by without hitting but its still damed close.


[This is message #397 by user birdman8099 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]