From: vega_man_larry_REMOVE_545310_THIS_@yahoo.com
Make sure that the shop performing the acid
dipping also replates/protects the bare metal. The
factory had a galvanized coating put on the bodies when
they were manufactured to protect against corrosion.
This coating will be removed by the acid dipping
process. The metal has to be recoated with some type of
chemical treatment to ensure no rust starts to grow in
those out of reach areas in the body, otherwise you
will have a rust bucket in a couple of
years.
Good luck,
Larry
[This is message #405 by user vega_man_larry on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]