The Official H-Body Internet Community

Vega, Monza, Sunbird, Astre, Starfire, Skyhawk

Skip to content

Front End Springs

Archives of HBOA Tech Club (no link available)

Moderator: Moderators

Topic locked

Front End Springs

Postby h-bot » Thu May 11, 2000 11:01 am

From: monzamiler_REMOVE_229617_THIS_@yahoo.com


Bob, If you are using the stock Vega lower
control arms I have seen Corvair Van rear springs used on
the front of Vegas before.Since you only dragrace
your Vega you might want to think about using the
Carrera coilover conversion.These are a bolt in and you
can get them in a 90/10 or 70/30 valving.Another plus
is they will allow you a 3 inch height adjustment.
Thanks, Randy
MONZAMILER


[This is message #423 by user monzamiler on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace
Top

Front End Springs

Postby h-bot » Sun May 14, 2000 2:03 am

From: twelve_second_vega_REMOVE_129646_THIS_@yahoo.com


1976 Pontiac Sunbird V6 A/C springs support an iron small block and it sits level...Robert


[This is message #425 by user twelve_second_vega on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace
Top
Topic locked

Return to HBOA Tech Club

Who is online

Users browsing this forum: No registered users and 3 guests