Vega to Monza front end

[h-bot]

From: ChevyTuf99_REMOVE_820831_THIS_@yahoo.com


OK everyone, this is what I have:
4 Monza
front spindles(not sure what year, but they have the
vented rotors, so the must be Monza) that have both
upper & lower control arms attatched...I was wondering
if I could just remove the upper & lower control
arms on my Vega, and replace them with the entire
Monza assembly. Here are my 5 questions for this
swap...

1. The obvious, will it work?
2. Will the shocks
& springs bolt up?
3. Will it alter the ride
height? (hopefully
it'll lift it an inch or 2)
4.
Will my sway bar still bolt up?
5. Would I have to
modify the control arm
bushings to make it
work?

Any help will be greatly appreciated.
Thanks in
advance
Jack


[This is message #507 by user ChevyTuf99 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]