From: denisst78_REMOVE_595652_THIS_@yahoo.com
I posted the pic on how to mkae the
plate to
adapt the urethane trans mount made
by ebergy or
other com.
use 3/16 steel plate
to improve
the design just weld two
3/8 NC nut on the 25/65
holes,
this will help you to tightnen the
plate while it`s
installed
Denis
[This is message #612 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]