OIL PUMP PICK UP TUBE

[h-bot]

From: timw48030_REMOVE_775856_THIS_@yahoo.com


Ok guys I got a problem with getting the right
oil pump pick up tube for my v-6 monza motor.Ive
tried the mellings pick up tubes both of them but they
wont work it sticks up to far on both of the tubes
they show that fits a monza v-6 231. The stock pick up
tube is bent different then the aftermarket ones plus
the o.e.m tube goes in the top of the screen and the
aftermarket one goes through the side does anybody have any
ideas?


[This is message #650 by user timw48030 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]

[h-bot]

From: denisst78_REMOVE_570241_THIS_@yahoo.com


Tim,
so members were parting out v-6
cars..
so they should have the pick up

What
happened to your old pick up tube?
is it too dammaged
to be rescued??

Did you try GM oo anather
aftermarket
oil pump company?

Denis


[This is message #651 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]

[h-bot]

From: timw48030_REMOVE_552139_THIS_@yahoo.com


Ok heres the deal with the oil pick tube.The
reason that I need to replace it is that the releive
flapper is stuck open plus I just got done putting
bearings in the lower end and I want to make sure nothing
gets into the motor.


[This is message #652 by user timw48030 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]

[h-bot]

From: denisst78_REMOVE_895284_THIS_@yahoo.com


Tim,
i`d try to order another one,
sometimes parts get mixed from
box to box...

Denis


[This is message #653 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]

[h-bot]

From: j_collins_50158_REMOVE_815309_THIS_@yahoo.com


tim if ya still have the old one take it in with ya.......jason


[This is message #654 by user j_collins_50158 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]