From: baker3502000_REMOVE_295163_THIS_@yahoo.com
Is there any difference between a 350 flexplate and a 400 flexplate.I had a 383 stroker built and need to know if I can use my flexplate from the 350 or if i need to by one .
[This is message #725 by user baker3502000 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
The Official H-Body Internet Community
Vega, Monza, Sunbird, Astre, Starfire, Skyhawk
flex plates
Moderator: Moderators
6 posts
• Page 1 of 1
flex plates
by h-bot » Sat Apr 07, 2001 9:10 am
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
flex plates
by h-bot » Sat Apr 07, 2001 2:36 pm
From: octowman_REMOVE_813925_THIS_@yahoo.com
IF YOU HAVE USED A STOCK 400 CRANKSHAFT THEN YOU
MUST USE THE 400 CRANK BECAUSE IT IS EXTERNALY
BALANCED, IF YOU HAVE A BALANCED ASSEMBLY THEN YOU CAN USE
THE 350 FLEXPLATE SINCE IT IS DESIGNED FOR A
INTERNALY BALANCED ENGINE TIM
[This is message #727 by user octowman on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
IF YOU HAVE USED A STOCK 400 CRANKSHAFT THEN YOU
MUST USE THE 400 CRANK BECAUSE IT IS EXTERNALY
BALANCED, IF YOU HAVE A BALANCED ASSEMBLY THEN YOU CAN USE
THE 350 FLEXPLATE SINCE IT IS DESIGNED FOR A
INTERNALY BALANCED ENGINE TIM
[This is message #727 by user octowman on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
flex plates
by h-bot » Sat Apr 07, 2001 9:19 pm
From: trentec_REMOVE_622636_THIS_@yahoo.com
You will need a 400 balancer for your 400 crank as it is externally balanced and the 350 is internal.
[This is message #728 by user trentec on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
You will need a 400 balancer for your 400 crank as it is externally balanced and the 350 is internal.
[This is message #728 by user trentec on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
flex plates
by h-bot » Sat Apr 07, 2001 9:20 pm
From: trentec_REMOVE_406486_THIS_@yahoo.com
oops, and Flex plate for the same reason.
[This is message #729 by user trentec on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
oops, and Flex plate for the same reason.
[This is message #729 by user trentec on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
flex plates
by h-bot » Mon Apr 09, 2001 7:36 am
From: denisst78_REMOVE_241399_THIS_@yahoo.com
before changing your flex plate
check wich
one you got now on
your engine...
I`ve built a
couple of 383 and
sometimes (depending on wich
crankshaft i used) i used the
neutral balanced (350)
flexplate
If yours is built with a stock crank
then it
should have the 400 flexplate on
it (unbalanced) it
will have a 3/4 inch wide
by 6 inch long weight
spot welded on it
Denis
[This is message #730 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
before changing your flex plate
check wich
one you got now on
your engine...
I`ve built a
couple of 383 and
sometimes (depending on wich
crankshaft i used) i used the
neutral balanced (350)
flexplate
If yours is built with a stock crank
then it
should have the 400 flexplate on
it (unbalanced) it
will have a 3/4 inch wide
by 6 inch long weight
spot welded on it
Denis
[This is message #730 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
flex plates
by h-bot » Wed Apr 11, 2001 12:13 am
From: denisst78_REMOVE_539856_THIS_@yahoo.com
Brian,
sorry i hitted the wrong button and
deleted your last post
what are you using now
for front tires?
i`ve ran a couple of 13" on my
spyders,
195/70/13 20560/13 215/60/13
only the
215 rubbed a bit when at full turn,
it also
depends on wich wheels you`re using
Denis
[This is message #731 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
Brian,
sorry i hitted the wrong button and
deleted your last post
what are you using now
for front tires?
i`ve ran a couple of 13" on my
spyders,
195/70/13 20560/13 215/60/13
only the
215 rubbed a bit when at full turn,
it also
depends on wich wheels you`re using
Denis
[This is message #731 by user denisst78 on Yahoo! Club HBOA TECH CLUB: http://clubs.yahoo.com/clubs/hboatechclub ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests