From:
CJBIAGI_REMOVE_461980_THIS_@yahoo.com
I know there was some discussion about this a
while back on the main GM H-Body site a while back but
I don't believe that anyone had successfully
installed a rack and pinion setup in a monza. There are a
lot of interfernce problems with the K member and oil
pan etc. It certainly won't be a bolt-in modification
to swap the front end to a rack and pinion/strut
suspension. In all reality, the stock suspension can be
modified to work very well with the selection of proper
springs, shocks, anti sway bar, and maybe even a different
steering box for a quicker ratio and better feel. Not
trying to discourage you from doing what you want but
you are talking about a lot of fabrication along with
getting the suspension alignment and everything else
sorted out. What exactly are you trying to achieve?
Clyde
[This is message #736 by user CJBIAGI on Yahoo! Club HBOA TECH CLUB:
http://clubs.yahoo.com/clubs/hboatechclub ]