WANTED: rear sway bar for 1980 monza

[h-bot]

From: acstestinc_REMOVE_267884_THIS_@yahoo.com


Alex:

Make sure you match the rear sway
bar size to the front. Rear needs to be 1/8 inch
smaller in diameter than front. E.G.: Front = 1 1/8" Rear
= 1" if front = 7/8" rear = 3/4". Otherwise car
will steer badly in hard cornering. I have a set of 1
1/8" front and 1" rear with brackets I can sell from
my parts car.

Paul


[This is message #296 by user acstestinc on Yahoo! Club Marco's Monza Messageboard: http://clubs.yahoo.com/clubs/marcosmonzamessageboard ]

[h-bot]

From: racemonza355_REMOVE_928590_THIS_@yahoo.com


i have a sway bar up here in seattle make me an offer and ill find out shipping per youre address
email me at racemonza355@aol.com


[This is message #298 by user racemonza355 on Yahoo! Club Marco's Monza Messageboard: http://clubs.yahoo.com/clubs/marcosmonzamessageboard ]

[h-bot]

From: locomonza_REMOVE_151526_THIS_@yahoo.com


Hi, Please let me know if you can sell only the rear, because I have the 1" front.
Let me know also how much for only the rear or both.
Thank you
Alex


[This is message #301 by user locomonza on Yahoo! Club Marco's Monza Messageboard: http://clubs.yahoo.com/clubs/marcosmonzamessageboard ]

[h-bot]

From: acstestinc_REMOVE_268717_THIS_@yahoo.com


Alex:
A 1" rear combined with a 1" front will
result in some evil handling. Strongly not
recommended.

I'll sell both but only in a month or so. They are on
a stored parts car and I need to find the time to
remove go up and remove them. Also the parts are located
in Canada. Have to look into shipping. If still
interested let me know.

Thanks
Paul


[This is message #306 by user acstestinc on Yahoo! Club Marco's Monza Messageboard: http://clubs.yahoo.com/clubs/marcosmonzamessageboard ]