FINISHED HEADER PROJECT ;)

[h-bot]

From: kleenkars2000_REMOVE_503842_THIS_@yahoo.com


wow, what alot of work...me and Ron Goans worked
all day in getting them in...changed the trans pan to
a chrome unit with a drain plug, changed plugs.,oil
and filter, and trans fluid and filter...iam running
cherry bombs until i get the flowmasters installed...not
real loud, i was surpised.... all went good...but to
tell you thr truth..id never do it again..unless the
engine was pulled first..then install them ..it would be
way easier with engine out of car...well..it was a
very long day...well worth it though ;) i have posted
some new pics...check em out under header
installation...have a great day everyone!!! Karl :) P.S. TIP: much
easier installing headers with the crossmember removed.
:)


[This is message #393 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: denisst78_REMOVE_882105_THIS_@yahoo.com


Karl,
i have ``only``1 four inch pipe.......

it passes under the car in the same way that the single 2 inch monza was

the muffler are just under the front seats


Denis


[This is message #394 by user denisst78 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: denisst78_REMOVE_864003_THIS_@yahoo.com


Just noticed
you have the 2135 headers
(1 1/2 primairy tubes)


get a look in the tech club
you `ll see my installation og hooker`s 2129


Denis


[This is message #395 by user denisst78 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: kleenkars2000_REMOVE_744422_THIS_@yahoo.com


I like your burn out pic on your profile...tire fryer!!!!!!!!! karl


[This is message #396 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: denisst78_REMOVE_121097_THIS_@yahoo.com


the best thing about this pic is

I ONLY HAD A V-6 IN IT!!!!!!!!!

low 235/50/13 helped a lot .......


now whit 255/60/15 and the 355 it`s even wilder

Denis


[This is message #397 by user denisst78 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: kleenkars2000_REMOVE_742692_THIS_@yahoo.com


YOUR KIDDING?....A V-6...what kind of gears do you have in the rearend???????....it must scream with the 355...my god...karl


[This is message #398 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: denisst78_REMOVE_689736_THIS_@yahoo.com


Karl,
the gera at this time was
a.........
2.73...

just rev the engine....
pop the
clutch......
and voila!!!!!

instant burnout


actually the small 235/50/13
should had made the 2.73
gears
act like some 3.55 or 3.73....


Denis

BTW you should be able to do some
nice
burnouts too whit yours


[This is message #399 by user denisst78 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: kleenkars2000_REMOVE_779977_THIS_@yahoo.com


oh believe me i have rofl!!!!! but i dont want to break her..lol too much time and money in it....but i do occasionally get crazy...then the boys in blue pay me a visit.;(..karl


[This is message #400 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]