reproduction mirage mounting strips

Archives of Monza Mirage Mania (no link available)

Moderator: Moderators

reproduction mirage mounting strips

Postby h-bot » Fri May 26, 2000 1:04 am

From: monzaaddict_REMOVE_644065_THIS_@yahoo.com


I am still willing to go through with the
reproduction of the mounting strips but I need at least 6 more
persons to tell me they definitely want a set (or two) to
cover the costs. The cost of the die alone was
estimated at 500 to 800 and I am estimating a dollar a foot
for the extrusion (I could not get an estimated price
from the company I have been talking to). I want to be
able to order 1000 foot. This may seem like a lot but
I was figuring five 5'(one extra for insurance)
strips per order. This would give at least 40 sets. I
want to have at least 25 confirmed buyers (or
sets)before going through with this. A few people who did not
mention that they were interested were bobby(monzilla),
Karl( Kleenkars) Ron Goans. If you guys out there
really want this let me know. You can email me at
monzaaddict@yahoo.com and I will give you all the details you want such
as the manufacturer so that you can be assured that
it is all legit. You can even post here as I check
these sites almost daily.
By the way, If this goes
through and there is enough demand I am willing to try to
reproduce the spyder fender scripts, the spyder emblems
(just the acrylic insert the chrome bezel would have to
be reused), 5.7 LITRE fender badges and a few other
items. I would even like to speak to the Goodmark
corporation about having steel cowl induction hoods built. I
do not know if you guys are familiar with this
company but they are reproducing sheetmetal for the more
popular cars out there and they recently started offering
cowl hoods for cars which cowl hoods were never
produced at the factory such as 70-81 camaro, S10, Nova ,
Late model full size trucks. These hoods are awesome
they even have the factory bracing and use all the
factory hinges and latches. I just do not know if there
is enough demand out there for this part


[This is message #509 by user monzaaddict on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


reproduction mirage mounting strips

Postby h-bot » Fri May 26, 2000 1:33 am

From: kleenkars2000_REMOVE_625962_THIS_@yahoo.com


hi there...yes iam also interested in the
mounting strips...and possibly the cowl induction
hood....please send me an e mail...and let me know the prices...
:) Karl p.s. I know ron goans would also be
interested...


[This is message #510 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Fri May 26, 2000 3:42 pm

From: v8hawk_REMOVE_168262_THIS_@yahoo.com


I would also be interested in at least 2 sets


[This is message #512 by user v8hawk on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Fri May 26, 2000 10:14 pm

From: mahoy78spyder_REMOVE_155021_THIS_@yahoo.com


David, any "Spyder" reproduction you do, you KNOW
I'm interested - especially the Spyder emblems
themselves! I've gone as far as taking them apart and
carefully handpainting them, then spraying a fine mist of
silver behind it to simulate the factory job, but as you
know, it's also difficult to find any emblem that not's
cracked! I need 4 for my car (2 are on the roof crown
moulding) so let me know how serious you are about this and
I'll try to help as much as I can.

Ken


[This is message #513 by user mahoy78spyder on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Fri May 26, 2000 10:33 pm

From: rm617_REMOVE_741061_THIS_@yahoo.com


David, I'll take 2 sets.

Thanks
Ron (rm617@webtv.net)


[This is message #514 by user rm617 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Sun May 28, 2000 9:03 am

From: miragezx1_REMOVE_727821_THIS_@yahoo.com


David,
I will also take two sets of the moldings whenever you can make the arrangements for reproduction.
Thanks,
Bob


[This is message #515 by user miragezx1 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Mon May 29, 2000 9:47 pm

From: lenny1_70_REMOVE_866859_THIS_@yahoo.com


I would also be interested in a set ( or two depending on price). Please keep us informed. Also I do hope the air dam reports are indeed true!


[This is message #519 by user lenny1_70 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Tue May 30, 2000 4:01 pm

From: kleenkars2000_REMOVE_944403_THIS_@yahoo.com


iam trying to see if there is a big demand for
the airdams...so far so good...i have about 8 people
interested to buy one or two airdams...if you are interested
lenny, please e mail me, kleenkars2000@yahoo.com,
because i have the list there on my e mail box...iam
trying my best in getting this project moving...i need
at least 20 orders to start it :) thanks Karl


[This is message #520 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Wed May 31, 2000 5:04 pm

From: cap10_77_REMOVE_740950_THIS_@yahoo.com


I am interested in a set or two. Depending on the price.
thanks
Vince
cap10@inreach.com


[This is message #522 by user cap10_77 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Tue Feb 12, 2002 2:35 pm

From: monzaaddict_REMOVE_847436_THIS_@yahoo.com


I have tried a few times to get in touch with
people who would like to purchase these items. I need at
least 35 persons (or 35 sets of strips) to justify the
cost of the die and labor. Anyone interested please
email me at monzaaddict@lycos.com I will be emailing
people who in the past showed an interest. The cost is
likely to be around 85 dollars a set of 5 ( 1 extra ).


[This is message #972 by user monzaaddict on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

reproduction mirage mounting strips

Postby h-bot » Tue Feb 12, 2002 2:43 pm

From: monzaaddict_REMOVE_296519_THIS_@yahoo.com


I have tried a few times to get in touch with
people who would like to purchase these items. I need at
least 35 persons (or 35 sets of strips) to justify the
cost of the die and labor. Anyone interested please
email me at monzaaddict@lycos.com I will be emailing
people who in the past showed an interest. The cost is
likely to be around 85 dollars a set of 5 ( 1 extra ).
If you post on this board please leave an email
address. A lot of people in the past said they were
interested but had no email address in their profiles and I
could not follow up. If I get enough people I will
contact the company i plan to use. I will then make the
available to all interested so that they can be confident
that this is not a joke.


[This is message #973 by user monzaaddict on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


Return to Monza Mirage Mania

Who is online

Users browsing this forum: No registered users and 1 guest

     
cron