MONZA MIRAGE AIR DAMS ARE HERE!

[h-bot]

From: kleenkars2000_REMOVE_700714_THIS_@yahoo.com


Hi gang :) I should be getting the first batch of
air dams hopefully this week :) The guy who is doing
them has been busy with school, and he said he will be
assembling about a dozen this week, so, i will be e mailing
the individuals who requested the air dam.Thanx
again, Karl :)


[This is message #560 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: miragezx1_REMOVE_941721_THIS_@yahoo.com


Karl,
What is the price of front air dam ?
Bob


[This is message #561 by user miragezx1 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: kleenkars2000_REMOVE_751508_THIS_@yahoo.com


Hi Bob, the price will be 200.00 plus shipping
and handling...thats what i paid for my original air
dam, so, i believe the 200.00 price tag would be
reasonable...it is actually quite a process to build a quality
air dam, i will be posting some pics of the 3 piece
air dam as soon as possible :) Thanx, Karl


[This is message #562 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: miragezx1_REMOVE_703150_THIS_@yahoo.com


Karl.
The price is reasonable. I also paid
$200 for my original one ( it was new and never used
). I will take one when you get ready to start
selling them. I know that I had a hard time locating one
and that anyone who did the search will appreciate
how difficult thay are to find.
Have you come
across any ideas on the fender
attaching strips? I
ended up using counter top molding for my
spyderzx1.
Best of Luck to Ya,
Bob


[This is message #563 by user miragezx1 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: mahoy78spyder_REMOVE_973069_THIS_@yahoo.com


Bob, I'd like to hear a little more about what kind of countertop moulding you used as your mounting strip for the flares. I'm intrigued.... any more info?

Ken


[This is message #564 by user mahoy78spyder on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: miragezx1_REMOVE_767454_THIS_@yahoo.com


Ken,
I do not have the model number or name of
the company, but I will be in my storage area the
first week in October and if I remember I will get it
for you. I suggest you go to your local home depot or
similar store to see what they offer.
What I got on my
monza is very close to the original. I looked all over
as you may recall, going to swap meets all over
trying to find mirage parts. The only thing I could not
locate was the attaching strips for my last set of
mirage fender/spoiler kit. However, I decided to take an
alternate route and I came across the countertop moldings.
They are not perfect, but very similar. I think if you
looked you could find even something closer. I believe
they come in 6 foot lengths. I did use the countertop
plastic strips to secure my spyderzx1( mirage
clone)mirage fenders, they attach the same way as the
originals with pop rivets. In addition,I had a factory
mirage rear spoiler that was cracked and warped, so I
got a fiberglass spyder rear spoiler/centerpiece and
put it on the car and molded in a special curve to
make everything match.


[This is message #565 by user miragezx1 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: wild469_2000_REMOVE_802577_THIS_@yahoo.com


I have the same problem with the rear cracking
and warping. As for the plastic strips, that is what
I am searching for. Do you have picture of the
molding that you are using. I have looked all through the
Home Depot here and cannot find it. If I could show
them a piture they might be able to lead me in the
right direction. Any assistance you could offer would
be great. Also, where did you find an airdam?


[This is message #570 by user wild469_2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: ronzasmonzas_REMOVE_138803_THIS_@yahoo.com


howdy...i will post a few pics of my trim if you
would like :) and as far as the air dam is concerned..i
will be selling reproduction front air dams very
soon...it took me about 4 years to find an original monza
mirage air dam, its almost impossible to find one...if
you would like one, i will be selling them very
soon...so keep in touch...take care...catch ya soon....Karl


[This is message #571 by user ronzasmonzas on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]

[h-bot]

From: kleenkars2000_REMOVE_938019_THIS_@yahoo.com


"NEWS BULLETIN" My partner who is building Monza
Mirage front air dams, is currently perfecting the air
dams...he has been working extensively on this
project...and we are getting closer by the minute.,to offering
you an exact front air dam replica...i apologize for
the delays..just letting you all know, this is
happening, and iam not playing games.Things really are
happening down this way!!! friend and founder, Karl


[This is message #576 by user kleenkars2000 on Yahoo! Club MONZA MIRAGE MANIA: http://clubs.yahoo.com/clubs/monzamiragemania ]