Who's black Monza is..............

[h-bot]

From: qwiktim_REMOVE_455415_THIS_@yahoo.com


........in the little picture to the left of this page? If anyone knows anything about it I would like to know a little about the rear suspension set up in it. Thanks, Tim


[This is message #231 by user qwiktim on Yahoo! Club MONZA VEGA: http://clubs.yahoo.com/clubs/monzavega ]

[h-bot]

From: guyray63771_REMOVE_170637_THIS_@yahoo.com


I don't know who's monza that is but ihave one for racing , do you need help with your set pu or what????. I am still running the original 7 1/2 rearend with richmand gears.


[This is message #232 by user guyray63771 on Yahoo! Club MONZA VEGA: http://clubs.yahoo.com/clubs/monzavega ]

[h-bot]

From: qwiktim_REMOVE_719930_THIS_@yahoo.com


Well, I just put a Currie Ford 9" rear end in and
am about to fabricate a torque arm. I saw the
pictures of that car leaving very hard and wondered what
rear suspension pieces were used, and if it was even a
torque arm or ladder bar or 4 link. Doesn't anyone know
who's car it is? Thanks


[This is message #233 by user qwiktim on Yahoo! Club MONZA VEGA: http://clubs.yahoo.com/clubs/monzavega ]

[h-bot]

From: guyray63771_REMOVE_874207_THIS_@yahoo.com


I have a freind that put a 9 inch rearend under his 80 spyder. The guy that set this up for him used all factory mounting brackets and locations. It worked reel good on the track.


[This is message #234 by user guyray63771 on Yahoo! Club MONZA VEGA: http://clubs.yahoo.com/clubs/monzavega ]

[h-bot]

From: qwiktim_REMOVE_910142_THIS_@yahoo.com


I know it would work fine, but I am a looking for
some good info from someone that is already doing
this.......my 383 was dynoed at 533 hp and 546 ft. lbs. of
torque. I plan to run in the mid/high 10's and really
wanted some factual info on a car that already runs in
that range and hooks........Thanks, tim


[This is message #235 by user qwiktim on Yahoo! Club MONZA VEGA: http://clubs.yahoo.com/clubs/monzavega ]