Monza rearend width?

Archives of V8 H-Body Club

Moderator: Moderators

Monza rearend width?

Postby h-bot » Mon Nov 13, 2000 1:50 pm

From: djv8ga_REMOVE_237158_THIS_@yahoo.com


What is the width, Brake face to brake face of a Monza rear? I am replacing the one in my 72 Vega with a custom 9" with chevy style ends. Thanks


[This is message #421 by user djv8ga on Yahoo! Club v8 hbody: http://clubs.yahoo.com/clubs/v8hbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


Monza rearend width?

Postby h-bot » Tue Nov 14, 2000 12:46 am

From: Phantom402_REMOVE_160969_THIS_@yahoo.com


hey man use the width of an s-10 rear end its a
perfect fit or a 8 in out of a early 70's maverick they
both will work and fit better.
With the 8 in mav
rear use a 3 in back space rear wheel.Or use corvette
8" wheels w/1/4 or 3/8 thick spacer or 15x8.5 w 3
5/8 back space.
Good luck. Any problems email me
at Xanadu4024@aol.com.
Lee


[This is message #422 by user Phantom402 on Yahoo! Club v8 hbody: http://clubs.yahoo.com/clubs/v8hbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

Monza rearend width?

Postby h-bot » Mon Nov 20, 2000 9:45 pm

From: Phantom402_REMOVE_648657_THIS_@yahoo.com


most rearend shops know the widths of stock stuff
try moser he should have stock widths on file ,,,but
heck if you want it done right just measure the inside
width of wheel wells add 1 in to each side for cearance
1/2 in if your only going in straight line . then
measure to outside of wheel wells then measure the wheels
you are going to use then take measurement off of
back side(mounting surface to inside of tire(yardstick
across then use tapemeasure add your clearance(1 in or
1/2 in per side as you decide) and add that to inside
wheel well width (add both sides0 and bang you have
your width to fit YOUR CAR.
good luck email me at
Xanadu4024@aol.com
Lee


[This is message #426 by user Phantom402 on Yahoo! Club v8 hbody: http://clubs.yahoo.com/clubs/v8hbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace

Monza rearend width?

Postby h-bot » Mon Nov 20, 2000 9:49 pm

From: Phantom402_REMOVE_571751_THIS_@yahoo.com


sorry to confuse BUT you lay under car and measure from inside to inside wheel well
hope this helps
Lee


[This is message #427 by user Phantom402 on Yahoo! Club v8 hbody: http://clubs.yahoo.com/clubs/v8hbody ]
h-bot
 
Posts: 53214
Joined: Fri Dec 15, 2006 8:30 am
Location: cyberspace


Return to V8 H-Body

Who is online

Users browsing this forum: No registered users and 1 guest