From:
Phantom402_REMOVE_956016_THIS_@yahoo.com
Ok I can tell you how I put my rear end in.
I
cut the S-10 leafs down and made trailing arms out of
them.I even used the old centering bolts over then I
welded a plate on the back of S-10 spring plate and used
a piece or square tubing with one side cut out and
hole drilled for the shocks( I have a so so picture I
will scan in and post in pictures).
Oh and I took
my mig welder and welded the outboard mount to the
wheel well. I'll post that too.
For rear shocks I
have used Monroe Sensa-Trac #5202(stock for my 71
Monte Carlo)and I have got a set of Monroe Reflex for a
1994 and up S-10 2WD #911129 and will let you know
what it drives like cause I am going on a trip sept 21
22 23 to Fort Wayne, I hope the work well cause the
rears are so good now.
Well any more questions let
me know.
Lee
[This is message #804 by user Phantom402 on Yahoo! Club v8 hbody:
http://clubs.yahoo.com/clubs/v8hbody ]