From: Bacchus_101573_REMOVE_108100_THIS_@yahoo.com
Alston Chassis in Antioch, IL. I don't have a number handy, but they are the best place to get them.
Brian
[This is message #79 by user Bacchus_101573 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
The Official H-Body Internet Community
Vega, Monza, Sunbird, Astre, Starfire, Skyhawk
Where do you find subframe connector
Moderator: Moderators
6 posts
• Page 1 of 1
Where do you find subframe connector
by h-bot » Wed Sep 05, 2001 1:21 pm
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
Where do you find subframe connector
by h-bot » Wed Sep 05, 2001 4:36 pm
From: billy_b_85222_REMOVE_875436_THIS_@yahoo.com
Chris Alstons Cassis works just sent me a quote
on the 80 Ca Monza subframe connectors@$96.00 plus
$18.00 shipping.Heres the email address link so you can
check for your car.Goodluck! Bill@GM HIGH PERFORMANCE
sales@cachassisworks.com
[This is message #82 by user billy_b_85222 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
Chris Alstons Cassis works just sent me a quote
on the 80 Ca Monza subframe connectors@$96.00 plus
$18.00 shipping.Heres the email address link so you can
check for your car.Goodluck! Bill@GM HIGH PERFORMANCE
sales@cachassisworks.com
[This is message #82 by user billy_b_85222 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
Where do you find subframe connector
by h-bot » Wed Sep 05, 2001 6:32 pm
From: Bacchus_101573_REMOVE_149978_THIS_@yahoo.com
Chris Alston Chassis Works is NOT the same as
Alston Chassis. There was a split in the family that I
still haven't been able to drag out of the guys at
Alston. Alston's (not chris's) subframe connectors tend
to be much better constructed and cheaper (you can
pick them up sometimes for $65 if you catch them at a
car show).
Brian
[This is message #84 by user Bacchus_101573 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
Chris Alston Chassis Works is NOT the same as
Alston Chassis. There was a split in the family that I
still haven't been able to drag out of the guys at
Alston. Alston's (not chris's) subframe connectors tend
to be much better constructed and cheaper (you can
pick them up sometimes for $65 if you catch them at a
car show).
Brian
[This is message #84 by user Bacchus_101573 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
Where do you find subframe connector
by h-bot » Thu Sep 06, 2001 5:14 am
From: billy_b_85222_REMOVE_212552_THIS_@yahoo.com
I never claimed they were the same company.Just
sharing info Ive obtained so far in my search with a
fellow club member.But since you mentioned it do you
have a retail price or a part number to help him out?
Thanks! Bill
[This is message #87 by user billy_b_85222 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
I never claimed they were the same company.Just
sharing info Ive obtained so far in my search with a
fellow club member.But since you mentioned it do you
have a retail price or a part number to help him out?
Thanks! Bill
[This is message #87 by user billy_b_85222 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
Where do you find subframe connector
by h-bot » Tue Sep 11, 2001 12:08 am
From: gypsyrt_REMOVE_816969_THIS_@yahoo.com
Look at the photos in the other clubs and you get
the idea where they go. You have to cut the floorpan
unless you want them 6" below the car.
I bought a 20'
stick of 2x2 box tubing and made me some. Ill post
pictures when I get them deveoped. It turned out really
well tying the rear control arm mounts into the
connectors on one end and to the Support under the rockers
on the other with a couple of kickers to the trand
crossmember. And the best part it only cost me 30.00! Rich
[This is message #109 by user gypsyrt on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
Look at the photos in the other clubs and you get
the idea where they go. You have to cut the floorpan
unless you want them 6" below the car.
I bought a 20'
stick of 2x2 box tubing and made me some. Ill post
pictures when I get them deveoped. It turned out really
well tying the rear control arm mounts into the
connectors on one end and to the Support under the rockers
on the other with a couple of kickers to the trand
crossmember. And the best part it only cost me 30.00! Rich
[This is message #109 by user gypsyrt on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
Where do you find subframe connector
by h-bot » Tue Sep 11, 2001 1:22 am
From: billy_b_85222_REMOVE_776789_THIS_@yahoo.com
hi1 Please email pics when you get the frame connectors in.Im lookiing for something cheap myself!Thanks! Bill@GM HIGH PERFORMANCE
[This is message #114 by user billy_b_85222 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
hi1 Please email pics when you get the frame connectors in.Im lookiing for something cheap myself!Thanks! Bill@GM HIGH PERFORMANCE
[This is message #114 by user billy_b_85222 on Yahoo! Club V8 Vega Conversions: http://clubs.yahoo.com/clubs/v8vegaconversions ]
- h-bot
- Posts: 53214
- Joined: Fri Dec 15, 2006 8:30 am
- Location: cyberspace
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests