V8 Alternator mount solutions

[marco_1978_spyder]

Just wondering, are there any easily attainable alternator mounting solutions that will work with the stock pulleys?

[vegafrog]

Try www.alangrovecomponents.com

[L79racer]

I use the corvette cast iron alternator bracket. You have to have a short water pump and it mounts on the drivers side. small block bracket.

http://cgi.ebay.com/ebaymotors/chevrole ... dZViewItem

[Sirshredalot]

I was looking at the corvette mount, and I have one and have it bolted to the head....but I havent mount an alternator in it yet.

I have the trans-dapt front mounts and was wondering if the belt will clear the front mounts.

Other than that if youre usingafactory style mount than its a geat mount...Ive used it on other cars with great success and very little flexing as opposed to flex and shift prone exhaust mounted brackets.

God bless
-Shred

If anyone has the front mounts and uses the corvette mount please feel free to chime in and tell me that itll work...haha

[peterpan]

i have that same mount for my vega and i put one on the wagon i built but i got them off old chevy trucks

[vega_man_larry]

I'm also running the Vette/Truck alternator mount. I have Transdapt mounts and had to "clearance" them a bit. I also had to shim the mount away from the block to miss the Transdapt bracketry. I use a set of Monza pulleys on the water pump and crank and I run a Monza A/C fan. Selection of the fan belt is critical and the whole setup barely misses the radiator. It takes a bit of experimantation to get it all to work.

Larry