I have a factory orange Service and Overhaul Manual for the 75vega and Monza 2+2 hatchback's tha wirring section is hard to read while out in the sun,, and equaly bad inside the shop office,, while rewiring the car for a new dash and a/c wiring that was missing,,I have been at a loss to find a couple of gremlins that I caused,,a intermentant wiper, a heat guage that pegs out on right side of gauge only while I turn on the head light's,,, the dimmer light comes on while the head light's are in the dim position out front.
I finaly went down to a
Blue print supply/ surveyor supply/in Huntville,Texas,,, The owner /clerk took the book over to his copy machine made copy's then went over to his extremly large machine copypier and set them on paper the size of a poster he played with the controls adding the enlagement % bumping it up a few notches,,till he got it right
,,did the engine comparment,,(figure (25),,, 12-34,,,, also
(figue) 27 12-35 /instument panel wirring, also the12-36 (figure 28 ) instrument cluster wirring, and 12-38 figure 30 air conditioning,, I went and got a nice set of map pens for color,,Got a lot of coloring to do for the holidays with my new easy to read enlagement's.
cost varies,,,Mine were less than 20.00, ,,,, .
yes they were black and white, and I can read them four feet away,
Hope this help's,,,
now if I can decode the mysterious apha code given to some of the combination's. Thank's for letting me share this obvious way of using technogy in a diffrent setting.Mike
Ps Note do not color every thing just the wire's going to the problem's area's first. MM