oil pressure /start switch wiring

Moderator: Moderators

oil pressure /start switch wiring

Postby AusRs » Sat Apr 12, 2008 4:20 am

drivers side of the engine on the bottom of the block at the back is a switch ( i assume) that has 3 wires going to it ,mine is just 3 wires that i have forgotten what order they go on to it :(
Does anyone have the position of the wires for me ,i will most likely find an old headlight plug and wire them into that so they stay where they are supposed to :)
User avatar
AusRs
 
Posts: 2364
Joined: Mon Jun 26, 2006 5:20 am
Location: Wollongong NSW Australia

1979 Chevrolet Monza Spyder


Postby steelhead » Sat Apr 12, 2008 11:04 am

2 on the sides and one on top?
blue to the left, pink on the right, purple to the top
although mine is under the distributor
75 2+2
76 2+2
77 Astre Formula
78 Monza Wagon
User avatar
steelhead
 
Posts: 389
Joined: Sat Feb 17, 2007 7:10 pm
Location: washington

1975 Chevrolet Monza 2+2

Postby AusRs » Sat Apr 12, 2008 11:17 am

yes thats the one
so i take it that blue is to the front of the car when looking at it ?
User avatar
AusRs
 
Posts: 2364
Joined: Mon Jun 26, 2006 5:20 am
Location: Wollongong NSW Australia

1979 Chevrolet Monza Spyder

Postby steelhead » Sat Apr 12, 2008 11:32 am

if your looking at the tabs sticking out with the single on top
blue on the left, pink on the right, purple to the top
75 2+2
76 2+2
77 Astre Formula
78 Monza Wagon
User avatar
steelhead
 
Posts: 389
Joined: Sat Feb 17, 2007 7:10 pm
Location: washington

1975 Chevrolet Monza 2+2

Postby spyder_xlch » Sat Apr 12, 2008 6:14 pm

purple_
blue_ pink_
Just a visual of what Lanse said. hope that helps
User avatar
spyder_xlch
 
Posts: 4693
Joined: Sat Apr 14, 2007 4:14 pm
Location: Northeast PA

1979 Chevrolet Monza 2+2


Return to Electrical and Wiring

Who is online

Users browsing this forum: No registered users and 16 guests