Page 1 of 1

Second Gen H Tach Jumper Settings

PostPosted: Thu Jul 20, 2017 1:13 pm
by zeke
Common issue is for jumper and pin to come out of tach and found lying in gauge cavity. Tach thinks its a 4 cyl now, so will read high on a 6 or 8 cyl.

Re: Second Gen H Tach Jumper Settings

PostPosted: Wed Nov 21, 2018 7:14 pm
by 79MonzaSpyder
Great post with good pictures and identification. I will be needing this, swapping a V6 Gauge setup into a V8 no gauge car, so I get to swap the dash harness over too.