Monza vented rotor brake calipers

[74vegwag]

I'm looking for a LH & RH set of vented style 76 and up, front brake calipers. Please let me know if anyone has a set and what the cost, plus shipping to 92110 (SoCal)would be, or pick up if you're local. Thanks, Dan

[Sunbird John]

Found a DFC part # 600-52001 for the rotor. They all seem out of stock.

[cjbiagi]

These calipers are nearly impossible to find new, you may find a LH one but RH are impossible. If you have or can find used ones they can be rebuilt.

[74vegwag]

It's getting harder than ever to find replacement parts these days. I did this swap years ago on my wagon, and I bought replacement parts for that set up, but I didn't get an extra pair of calipers. If anyone has a good pair of used ones they're willing to sell, I would be interested. Thanks.

[Sunbird John]

I just saw this.
https://www.oreillyauto.com/shop/b/brak ... olet-monza
I also saw a Bosch listing on Google. ??

[monzaaddict]

https://www.napaonline.com/en/search?te ... referer=v2

[chevyart]

hey monzaaddict do those calipers you referred to fit and work on the monaza vented rotors and do they bolt right up without any alteration to them? thanks art in NY

[1976hawk]

I have a pair of rebuilt caliper from a 77 Monza. Listed in parts for sale. I can't post pictures here, but if you send a PM, H-Body sends me an email and I'm pretty sure that I can reply and post pictures. Jeff

[74vegwag]

I've been off the site for a while, but I wanted to respond to the latest postings. I was able to find a used set that I was able to clean up and rebuild. Thanks to all who responded.

[sirrick4]

It may be a bit late and a tad expensive for some but I ended up getting some adjustable Upper and lower control arms from Justin Kill. I sent over some upper and lower ball joints from a HQ - WB Holden and got Justin to make the control arms to suit. The advantages for me going this way is I can buy parts for Holdens over here in OZ and the discs are ventilated. I also used springs and shocks to suit a V8 LH Torana. It was also handy for my 5 lug conversion as the HQ hub is the same stud pattern as Chev. Is there anything over there that could do the same job? Just an idea I thought I would throw out there.